clintavo's latest activity
-
I updated my original post to correct my flow statement. I don't know how moving the hot part of the radiator behind the intercooler is...
-
I don't think coilovers would really do what you expect to resolve comfort issues. The ITS module absolutely will. You'll find people's...
-
Try the module first. Cheap and 10 minutes to install. If you don't like it you can sell for a small loss and try coilovers.
-
You can spend +50 hours exploring this forum, youtube, and Bob is the Oil Guy forums for hearsay and anecdotes and end up exactly where...
-
Regarding ceramic exhaust coatings, Iād highly recommend going with Swaintech...
-
One thing you can do to help lower temps thats not mentioned here is creamic costing your downpipe and heat shields, same with the...
-
I guess I am old school but temperatures for coolant, oil and transmission fluid have closely related optimal operational temperature...
-
I have a badass radiator in the works along with what I think will be the best performing oil cooler solution as well. I'm hopeful to...
-
In daily driving today after installing the plate yesterday, here are my observations after the engine was warmed up and during a 30...
-
I have done a few with it on, and the temps were lower by an average of 10-15 degrees. Its hard to say if it was the plate though...
-
Plate is 2mm thick with connection points slightly offset as compared to the otherwise flat 0.5mm stock undertray. No ground clearance...
-
The benefit of most aftermarket intercoolers appears to be situational at best, as most lower IATs but increase coolant / oil temps due...
-
clintavo reacted to Cueyo's post in the thread 25% Tariff being put on all imported cars like the CTR with
Haha.
-
Pela 650 Oil Extractor makes oil changes quick, clean and easy. Iāve been using mine for over 20 years where it has saved me a lot of...
-
clintavo replied to the thread Cusco Brake Cooling Baffle Plate (3F7 340 A).That's what I would have done!
-
clintavo reacted to blueroadster's post in the thread Cusco Brake Cooling Baffle Plate (3F7 340 A) with Like.
Update...I decided to skip grinding a bit off of the baffle plate where it was making contact. Instead, I took the car to a parking lot...
-
clintavo reacted to blueroadster's post in the thread Cusco Brake Cooling Baffle Plate (3F7 340 A) with Like.
Well, scratch my last post. When the car is lowered back onto the ground, the bottom of the plates touch the top of the end link bolt...
-
clintavo reacted to blueroadster's post in the thread Cusco Brake Cooling Baffle Plate (3F7 340 A) with Like.
FYSA...There is one minor clearance issue that needs to be corrected. After installation of the baffle plate, there is about 1/8"...
-
clintavo reacted to blueroadster's post in the thread Cusco Brake Cooling Baffle Plate (3F7 340 A) with Like.
So when you order the Cusco brake cooling baffle plates, you only receive the replacement plates. The stock #25 bolt and Frankenstein...
-
clintavo reacted to blueroadster's post in the thread Cusco Brake Cooling Baffle Plate (3F7 340 A) with Like.
Weights (left and then right sides): Measurements:
-
clintavo reacted to blueroadster's post in the thread Cusco Brake Cooling Baffle Plate (3F7 340 A) with Like.
Carbon composite replacement for the 2023+ Honda Civic Type-R (FL5) front brake Air Inlet Panels: #12: Passenger Side: Plate, R - Air...
-
clintavo reacted to Websitesdown's post in the thread 25% Tariff being put on all imported cars like the CTR with Like.
Trump has consistently framed trade deficits as a sign that the U.S. is being exploited by its trading partners, and Japan is no...
-
clintavo reacted to Robo7's post in the thread 25% Tariff being put on all imported cars like the CTR with Like.
This thread makes it pretty clear who has an understanding of economics. The price of all cars, new and used, is about to increase in...
-
I'll be 53 when the white CTR arrives next year. Bought the other white car when I turned 50, after 10 years of saving. I figure both of...
-
I bought my Type R at the young age of 72 and bought my S2000 at 67 as a late retirement present.. the R screams..āIām Specialā!! Life...
-
as many have pointed out, age is not a factor. For me, having a Type R is a dream that I want to materialize, regardless of my age. This...
-
You are not too old. I am in my 60's. Still love it after driving it two years. Lots of smiles and impromptu conversations- with car...
-
75 a month ago. My wife likes the ride better than she did the Subaru WRX I had.
-
I am 74
-
Out of curiousity how old is the CTR owner. I'm in my mid 40's and sometimes feel a bit too old for the car.
-
clintavo reacted to josh_00's post in the thread Official Wheel Fitment Thread for 11th Gen FL5 Civic Type R with Like.
im thinking about potentially spending way too much money on these mugen wheels from blackhawk japan...
-
I always recommend Project Kics Monoliths. THey fill the lug holes and dont stick out too much
-
If you dont need anything crazy and dont plan to drive the car hard to take it to the track, get some ceramic pads and call it a day...
-
R for Rust
-
I complied the stock FL5 wheel & tire specs below. I got tired of looking for them when shopping for wheels/tires and running them...
-
I paid $127 in duties/taxes for $3500. No issues ordering from them.
-
And you stick the last section up your ass thank you
-
I've been pleased with Gear300. It needs a change every 6 track days or so. You can really start to feel the degradation.
-
Sir this is the internet š I went with MOTUL GEAR 300 75W-90 GEAR OIL MOTUL GEAR 300 75W-90 GEAR OIL Motul 105777
-
I swapped out the factory fluid for Redline MT-90 at 20k miles on my car. the difference was immediately noticable. 1st-2nd felt a...
-
Not if you track the car!
-
Literally fly to like Missisippi or ALabama or Oklahoma, Buy one, Fly over to buy, Drive back. And by the time youre home, it already...