princers's latest activity
-
princers replied to the thread Type R Paint Issues.pretty pissed it took me a month to notice this: -
-
Ok. ready...
-
After 6 months wait :D
-
It wasn’t an easy decision but I liked the way the welds were perfection and fitment was spot on a long with being not clamped with...
-
princers replied to the thread What did you do to your FL5 today?.oh man, they're a must have lol. i have them on my fk8 & fl5, legit worth every penny (albeit expensive bc Mugen unfortunately)
-
princers replied to the thread GM Synchromesh.Dealership guy here, so I'll chime in. Technically, Honda can void your warranty if you use a different fluid from what they recommend...
-
OEM forged wheels with 15mm spacers today. Did my first ever rinseless wash yesterday with P&S Absolute and I am very impressed.
-
Oooh…pictures of those when you get them!
-
princers replied to the thread What did you do to your FL5 today?.i have those coming in too lol mugen cf to match
-
-
princers replied to the thread What did you do to your FL5 today?.just added the Mugen door protectors which is a must have imo as i kick the hell out of the door EVERYTIME i get out 😂😅
-
princers replied to the thread The FL5 Dealer ADM Markup Thread.https://www.honda.appletreeautomobiles.com/inventory/new-2025-honda-civic-type-r-civic-type-r-fwd-type-r-4dr-hatchback-jhmfl5g48sx003177/...
-
Changed the coolant reservoir today, surprisingly easy install with just a tiny bit of lost coolant. Didn’t have to remove any brackets...
-
Swift Springs WOT Cooling Plate Mugen side mirros Tax return season, let's go!
-
princers replied to the thread Varis ARISING 1 EVO fender trim kit.build is looking amazing OP, love your ze40s 🤤🤤
-
princers reacted to TheFactor's post in the thread Who’s running a AWE touring exhaust on there FL5 ? with
Like.
Thanks for the clarification 👍🏻👊🏻 and yes it helps -
princers reacted to Clark_Kent's post in the thread Who’s running a AWE touring exhaust on there FL5 ? with Love.
That J's Racing 70RR was known to be an ear bleeder. Reminds of me of those Buddy Club exhausts from back in the day. You take it to...
-
princers replied to the thread Who’s running a AWE touring exhaust on there FL5 ?.man i worded that terribly 😂. in particular on the fk8, it drones horribly (esp low rpm and when cruising in 6th, its almost...
-
princers reacted to Two Step Performance's post in the thread Who’s running a AWE touring exhaust on there FL5 ? with Haha.
Sounds like you are a glutton for punishment. :p
-
princers replied to the thread Who’s running a AWE touring exhaust on there FL5 ?.remark > ive ran awe tourings on all my cars (fk8, corolla gr, mk7/mk8 golf r’s, etc etc) and they all drone badly in the 2-4k rpm...
-
princers reacted to Major Ram's post in the thread Maryland Advan GT Beyond - RW 18x9.5 +45 with Haha.
Thanks man, no worries! I could only offer what I can afford to pay. Anyway Goodluck
-
princers reacted to Nanook's post in the thread New to CTR - impressions log. What do I need to know? with Like.
Great to hear you’re enjoying the car it is an awesome car. * Potholes will be the bane of your existence. * You think the tank is...
-
princers replied to the thread New to CTR - impressions log. What do I need to know?.you have to change the flux capacitor every other oil change
-
The roof is laser welded to the chassis. Do yourself a favor and just wrap the roof in carbon look vinyl after you fix it-good luck.
-
They also have an eBay store. They will put together a package deal if you plan to buy a few parts.
-
I bought the dashboard panel and cup holder off amazon, the rest I got direct through their shopify store, eta about 3 weeks straight...
-
princers replied to the thread Create Carbon.did yall buy direct off the website or from the amazon storefront?
-
Update on all my Create Carbon (JSwan) pieces that all finally arrived. Fitment and quality is truly phenomenal!
-
Best bang for your buck and if you plan to do more carbon inside the car I would go with CC as you can match it so well since they make...
-
Yep. Jester tuned me on e20. Prl hvi, prl titanium turbo inlet, turbo blanket, dp, prl front pipe, canflex. He took care of me in no...
-
princers reacted to Clark_Kent's post in the thread Is GoTuning Still in Business? Lack of Customer Service with Spoon USA with Like.
Initiate the credit card chargeback and move on. Order it from one of the importers. Even after a hefty shipping charge, it will likely...
-
princers reacted to earfejj's post in the thread Washington Volk Racing CE28N-Plus 18x10.0 +40 in Mag Blue (God Spec) with Like.
Well… we did the thing. We bought a house. It’s pretty sweet, charming, probably haunted, and it now eats all the money. So it's time to...
-
princers replied to the thread Quality of Life mods for the FL5.mugen scuff plates for the door because i have a habit of kicking the bottom of the door panel everytime i get out. lifesaver on both my...
-
princers replied to the thread Is GoTuning Still in Business? Lack of Customer Service with Spoon USA.was wondering the same as i had emailed them for an eta a month ago with no reply still
-
princers replied to the thread What did you do to your FL5 today?.some chasing j’s bolts (have to do the strut tower nuts when my strut bar comes in)
-
-
princers reacted to Club Version's post in the thread Club-Version FL5 Civic Type R Build Thread with Love.
JDM Seat Again? (Spoon Carbon Bucket) After lots of internal mental debate, I decided to sell the Mugen MS-C and get a Spoon seat. One...
-
The benefit of most aftermarket intercoolers appears to be situational at best, as most lower IATs but increase coolant / oil temps due...
-
princers reacted to simpleisbest's post in the thread Current best intercooler for track use? with Haha.
You mean the "stock" IC that is V-mounted? I don't think that's a good comparison.
-
I think the non race looks better, reminds me of the HPD kit from Honda for the non CTR hatch
-
princers replied to the thread Spoon front lip finally here!.genuinely dont understand why it doesnt sit flush but imo its the best looking lip available (aside from m&m). cant wait to see yours...
-
I just installed mine the other day. Can’t wait to see how the car performs on track with it.
-
Spoon springs and collars installed this past week!
-
princers reacted to lmtlsauto's post in the thread God Spec info 18x10 +40 (pictures, alignment specs, tire info) with Like.
All of our customers run 275/35 on 18x10 +40. All ranging between different suspension setups.
-
princers replied to the thread God Spec info 18x10 +40 (pictures, alignment specs, tire info).what suspension are you on? have you pulled the pins? etc.
-
Went for a 2hr rip through some twisties before work. :p
-
princers replied to the thread Create Carbon.curious about the shift console panel before i pull the trigger on olm (or mugen 🙃)
-
princers replied to the thread What did you do to your FL5 today?.took it out to pick my daughter up at school 😂
-
-
It’s exactly what I wanted. Nice tone, but not excessive. I plan on doing a downpipe down the road, so it’ll be a bit more lively later...
-
princers reacted to Club Version's post in the thread Club-Version FL5 Civic Type R Build Thread with Like.
Getting More Seat Time at Sebring With no changes from my January attempt I was able to lower my PB by 4 seconds to a 2:31.24. On my...
-
princers reacted to Club Version's post in the thread Club-Version FL5 Civic Type R Build Thread with Love.
JDM Seat Goodness (Mugen MS-C Full Bucket Seat) Following my recent back to back track days I noted that I really need to get a better...
-
princers replied to the thread What did you do to your FL5 today?.how do you like it so far? great build quality/price point/sound from clips I've heard so definitely a solid option for those who don't...
