PRL Motorsports's latest activity
-
PRL Motorsports replied to the thread [PRL][High Volume Intake] Missing intake filter bolt.Thank you for the support. That is what we are here for! Always happy to help, & anyone who needs a quick response on an issue, DM's are... -
PRL Motorsports posted the thread NEW PRL Steering Wheels 11th gen Civic/5th gen Integra in Modifications - Exterior / Interior / Lighting.Excited to announce & release a fun project that we have been working on. We just released a new line of steering wheels! These are a...
-
-
PRL Motorsports replied to the thread [PRL][High Volume Intake] Missing intake filter bolt.The change was made early Sept 2024. We released the TSB in October, but by then we were putting the new bolts in the kits. Older stock...
-
PRL Motorsports replied to the thread [PRL][High Volume Intake] Missing intake filter bolt.The guide is the one we made upon release. I let marketing know that it needs to be updated!
-
PRL Motorsports replied to the thread [PRL][High Volume Intake] Missing intake filter bolt.The correct screw specs are M5x0.80x16mm. We made the bolts longer. The issue with the 12mm is that the threads did not go deep enough...
-
PRL Motorsports reacted to Sporky McGeuschky's post in the thread PRL P-07F Forged Wheel Set with
Like.
@PRL Motorsports Great looking job! Hi. I hope y'all are successful with these wheels. I am not a fan of this particular spoke... -
PRL Motorsports replied to the thread 11th Gen Civic 1.5T Intercooler Upgrade Development & Release!.Happy to announce that we just got CARB approval on the intercooler! E.O. D-878-4
-
PRL Motorsports replied to the thread [PRL][High Volume Intake] Missing intake filter bolt.You should not be charged! DM your email to me & I will get it taken care of personally.
-
PRL Motorsports replied to the thread [PRL][High Volume Intake] Missing intake filter bolt.Anyone missing screws shoot [email protected] an email & ask for a set of PRL2.1032.12.0. We will get you taken care of! Due to...
-
With the stock intake there was about 0.5” of clearance in between the intake duct to the air box and the fan shroud. I reinstalled your...
-
PRL Motorsports replied to the thread PRL HVIK installed and datalogR showing higher IAT temps.No benefit in covering this hole. Air is still being pulled through the duct system over this area. The goal was to maximize the airflow...
-
PRL Motorsports replied to the thread PRL HVIK installed and datalogR showing higher IAT temps.What hole are you referring to? Drop a picture please.
