How to installation instructions mud guard’s for civic 2022

Tony503

Senior Member
Joined
Oct 10, 2015
Threads
5
Messages
99
Reaction score
51
Location
WA
Vehicle(s)
23 Mazda3 Turbo, 13 FR-S, 03 RSX Type S
I actually just did this yesterday. I skipped cutting the fender liner for the middle screw on the rears and it still seems pretty secure with just 2 screws. Overall, I agree a pretty easy install, even easier if you have a short thumbturn screwdriver so that you don’t need to turn the steering wheel back the other way.
 

zeroptzero

Senior Member
First Name
Joey
Joined
Jan 6, 2022
Threads
3
Messages
421
Reaction score
327
Location
Ontario Canada
Vehicle(s)
2022 Civic Si, 2022 Subaru WRX
I installed rear mud guards today, my car came with the front mud guards but I had to buy the rears. I bought them from my dealer parts counter, I was surprised how cheap they were as Honda parts.

My installation was different than what is shown in the instructions link above. The recessed dimple used as a guide was not even close to where my clips lined up. I took it into my own hands and I did a custom installation, it all worked out but not according to any instructions.

Instructions for Honda accessories can be found at estore.honda.com
 
Last edited:

OGGsr

Senior Member
First Name
Jamie
Joined
Dec 4, 2021
Threads
10
Messages
180
Reaction score
156
Location
Richmond VA
Vehicle(s)
PWP 2022 Civic Si
I actually just did this yesterday. I skipped cutting the fender liner for the middle screw on the rears and it still seems pretty secure with just 2 screws. Overall, I agree a pretty easy install, even easier if you have a short thumbturn screwdriver so that you don’t need to turn the steering wheel back the other way.
Installed mine the same way without cutting the fender liner. I took the rear wheels off to make the installation a bit easier. I think both front and rear splash guards were less than $80 from Honda. Very easy installation.
Sponsored

 
 





Top