Sponsored
axion_industries's latest activity
-
axion_industries replied to the thread 2021 Civic Type R - Lithium Battery.Id be careful with Lithium and low cost batteries, I will have to look into them more but I personally dont like buying cheap parts -
axion_industries replied to the thread 2021 Civic Type R - Lithium Battery.We run this and zero complaints, saves a ton of weight off the car over the factory battery...
-
axion_industries reacted to AspecR's post in the thread 2021 Civic Type R - Lithium Battery with
Like.
Look into anti-gravity batteries, have no idea the quality of powertex batteries -
axion_industries replied to the thread Fe1 best downpipe.Ours will make the most HP gains, really should look into the design we did unlike anything on the market. And its 100% USA made
-
-
axion_industries replied to the thread Fe1 best downpipe.We have a downpipe we actually make in the USA and its nothing like the competition Catted and catless in one downpipe. We only have...
-
-
axion_industries replied to the thread Acuity Instrument's Short Shifter.
-
axion_industries replied to the thread Axion Industries J swap build.Haltech dash and Nexus S3 ready....
-
-
axion_industries posted the thread Axion/ Hasport Rear Gunmetal mounts in Civic Si Forum (11th Gen).New look from us at Axion. Our 11th gen Civic was used to make the Hasport full mount kits and we wanted to bring out a custom color to...
-
-
axion_industries replied to the thread Axion Turbo inlet thermal gasket.
-
Hey guys New part for the community we thought would work really well for those guys swapping inlet pipes and want to keep heat soak to...
-
-
axion_industries replied to the thread Axion Industries Custom painted valve covers.We dont do those, they never turn out 100% perfect
-
axion_industries replied to the thread Axion Industries Custom painted valve covers.Type R white with added pearl
-
-
axion_industries replied to the thread Axion Industries J swap build.
-
-
axion_industries reacted to Sporky McGeuschky's post in the thread Axion Industries J swap build with Like.
Does this mean y'all can build me a brush guard with a rack for my PIAA rally lights?
-
Look at the maw on that snail!
-
axion_industries replied to the thread Axion Industries J swap build.Working on the tubular front end to support the intercooler and radiator
-
-
Hey guys New part added to our lineup, finally got around to making these happen for the group. We are doing a pre order right now...
-
-
axion_industries replied to the thread Axion Industries Custom painted valve covers.Another cover going out today!
-
-
For a minute there I thought that sticker said “Traum 2024”😦
-
axion_industries replied to the thread Axion Industries J swap build.Traum Pistons and P2R I beam rods getting ready for 1000hp
-
-
axion_industries reacted to Sporky McGeuschky's post in the thread Axion Industries J swap build with Like.
Dr. Frankenstein, What is this machine-beast that you seek to wake amongst the living??? I cannot even fathom that which I see in...
-
axion_industries replied to the thread Axion Industries J swap build.Fabrication now on the front tubular support bars for intercooler. Belak wheels are back on the car, one step closer to some 1/4 mile times
-
-
axion_industries replied to the thread Axion Industries Jswap 11th gen Civic.Fabrication now on the front tubular support bars for intercooler. Belak wheels are back on the car, one step closer to some 1/4 mile times
-
-
axion_industries replied to the thread MDR Tube & Fin Intercooler Released!.Amazing stuff guys, we will continue to support and keep pushing your amazing products with any build we touch.
-
axion_industries reacted to SBX Performance's post in the thread MDR Tube & Fin Intercooler Released! with Like.
MDR T&F is now officially released. First batch sold out. I have 2 coming in within 2 weeks or so. Yeah, it’s slightly heavier than...
-
axion_industries replied to the thread Does The Type R Intercooler Directly Bolt Onto Civic SI (Just Intercooler Itself).Does not bolt up at all, the intercooler piping kit is 100% different
-
axion_industries replied to the thread What did you do to your FL5 today?.Just a 72mm turbo with huge intercooler
-
-
J35Z2 was a lot of fun in my Crosstour. RIP.
-
axion_industries replied to the thread Axion Industries J swap build.New updates 72mm turbo up front and the massive air/air intercooler
-
-
axion_industries replied to the thread What did you do to your FL5 today?.Thanks so much man
-
axion_industries reacted to Chilly613's post in the thread What did you do to your FL5 today? with Like.
From their posts, they use OEM valve covers and are painting them in house...
-
axion_industries reacted to hongda's post in the thread What did you do to your FL5 today? with Like.
Installed the PRL Titanium inlet. Already had the High Volume Intake, TSP glossy carbon variant. I really want to get a Spoon valve...
-
axion_industries reacted to Chilly613's post in the thread What did you do to your FL5 today? with Like.
Check out @axion_industries, they're making their own "Spork" valve cover...
-
axion_industries replied to the thread Axion Industries Custom painted valve covers.That looks so good, can't wait to see it installed
-
axion_industries reacted to 0x1d7's post in the thread Axion Industries Custom painted valve covers with Like.
This is going to look great once installed. Thanks, @axion_industries!
-
axion_industries replied to the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup.Our next batch is using 400cel cats so no codes will be present and will pass smog in most States as some States have visual which no...
-
axion_industries reacted to roguestatus88's post in the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup with Like.
I've been seeing the Axion option pop up more and more. I don't really have a need to ever swap out to catless, but the choice to do it...
-
axion_industries replied to the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup.Well PRL, RV6 and many others only offer catted downpipes. PRL dont even make any downpipes and havent for 3 years now. Catless will...
-
axion_industries replied to the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup.Cerakoted 1.5t downpipe we just did for pricing
-
-
axion_industries replied to the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup.Vband clamps are the best in the industries and will not break or leak I have over 300 downpipes being used for 1.5t and 2.0t and no...
-
axion_industries reacted to MainMind's post in the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup with Like.
That actually looks like a very interesting solution, especially for street/track flexibility. However, I do have a technical concern...
-
axion_industries replied to the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup.We were using the 200cel cats for the last 5 batches we did and work great but the demand with people wanting a 400 cel was hurting us...
-
axion_industries reacted to Cueyo's post in the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup with Like.
The exact one I'm eyeing as well, the ability to go catless that easy and never have a CEL during daily driving is unmatched by anyone else.
-
axion_industries replied to the thread FL5 Downpipe Comparison (PRL vs RV6 vs Milltek vs Scorpion) – Dyno Data, Design Differences & Catless Setup.You should look up our Axion Industries 2n1 downpipe, only downpipe on the market that comes catted and can swap to catless in 10 min...
-
-
axion_industries replied to the thread Axion Industries Jswap 11th gen Civic.Mounts are finished, we now work on the turbo manifold to sit our 72mm up front
-
-
axion_industries replied to the thread Axion Industries J swap build.A video for you guys
-
This is going to absolutely rip!
-
axion_industries replied to the thread Axion Industries J swap build.Another view, lots of room. The mounts are all fabed up and we will have a video coming later today going over everthing
-
