SlntHntr27
Member
- Thread starter
- #1
Hey All,
1st time real post. I purchased a 2023 Civic Sport - Meteorite Gray a few months back. About a week later I got it tinted. Must have for Florida but also a nice look.
I then started looking up some mods to give the car more style. Found a ton of resources on here and guides. Watched a bunch of YT videos and decided to make some purchases. Besides the tints I picked up black badges to replace all around the car to match the rims.
I picked up these Angeleyes LED Foglight kit, Windows Visors, Front Lip, Rear Bumper Sequential Lights and Hydraulic Hood Lifts.
This weekend I decided to try and install it all. Took me a few hours on Saturday and a few on Sunday. Overall everything was pretty easy to install. I took a bit longer as I wanted to heat shrink all the wires that were not protected in the engine bay. I ran everything as nice and neat as possible and used Posi Taps to reduce damage to the headlight wiring harness for the Angeleyes and Foglights.
Here is the finished product. Sorry for the formatting of the pictures and videos. If you have any questions I have a lot of pictures of the tear down and videos. I had a blast making the modifications minus some of the wiring.
1st time real post. I purchased a 2023 Civic Sport - Meteorite Gray a few months back. About a week later I got it tinted. Must have for Florida but also a nice look.
I then started looking up some mods to give the car more style. Found a ton of resources on here and guides. Watched a bunch of YT videos and decided to make some purchases. Besides the tints I picked up black badges to replace all around the car to match the rims.
I picked up these Angeleyes LED Foglight kit, Windows Visors, Front Lip, Rear Bumper Sequential Lights and Hydraulic Hood Lifts.
This weekend I decided to try and install it all. Took me a few hours on Saturday and a few on Sunday. Overall everything was pretty easy to install. I took a bit longer as I wanted to heat shrink all the wires that were not protected in the engine bay. I ran everything as nice and neat as possible and used Posi Taps to reduce damage to the headlight wiring harness for the Angeleyes and Foglights.
Here is the finished product. Sorry for the formatting of the pictures and videos. If you have any questions I have a lot of pictures of the tear down and videos. I had a blast making the modifications minus some of the wiring.
Sponsored
Last edited: