Sponsored
Nikw91's latest activity
-
Buy the m3. If you want to to come back plenty of fl5 for sale 👍 -
Plazmaman now also make an intercooler for the FL5 (piping kit also coming soon which also includes upper charge pipe), if any of you...
-
-
Nikw91 reacted to SBX Performance's post in the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨 with
Like.
Honestly, performance wise, most quality downpipes on this platform will end up in a similar horsepower range when properly tuned. Where... -
Nikw91 reacted to SBX Performance's post in the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨 with Like.
🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe (Made in the USA besides the heat shield standoffs)🚨 We’re excited to...
-
They’re ready for shipment we’re just waiting on MDR for final release approval, which should be any day now. The setup will follow a...
-
Hello everyone. New FL5 owner here, but not new to Honda. I love this website. Reminds me of Nsx prime! I have an Nsx in my garage, but...
-
Yes, you reuse the stock hood seal. The instructions are on PRL's site.
-
Nikw91 reacted to Unity Performance's post in the thread FL5 Intercooler Reference Thread with Like.
I got a couple guys to chime in on the FL5/DE5 Facebook Group about the RV6 Intercooler, and their experience with it long-term. Who...
-
IMHO, this is where core design matters more. The J's Racing T&F intercooler is in a different league where the core uses a double...
-
I just ordered a PRL T&F the fin damage I’m seeing is making me change my mind and possibly cancel the order. I really want to see what...
-
You can bend the fins back straight with a pointy little plastic pry tool
-
We installed a few HKS intercoolers so far for customers in the DFW area and think the fins are a little on the thin side. Matches up to...
-
Nikw91 replied to the thread FL5 Intercooler Reference Thread.Just little rocks getting stuck between the fins and some bent fins. Tubes are fine
-
Nikw91 replied to the thread FL5 Intercooler Reference Thread.I got the HKS right before the price increase and love it. No added lag and great results at the track. But if a used PWR popped up I...
-
This is why I tell people to run B&P intercoolers for the street, they tend to be more robust.
-
Nikw91 reacted to RODSCIVIC's post in the thread Volk Racing 21A Now Available in FL5 Spec with Like.
Looks like 19’s in F1 …. I want to see the F1 lip…
-
Nikw91 replied to the thread FL5 Intercooler Reference Thread.Thank you for the heads up!
-
On the hard pipe before the throttle body, it was the hole for mounting the sensor. First tried cleaning it up with a thread chaser but...
-
Nikw91 reacted to ChampionshipWhiteFL5's post in the thread MST! Trying something different. with Like.
Hey! So I just ordered the MST downpipe and intake. Even though I have the PRL. Just thought I’d try something additional or different...
-
Nikw91 replied to the thread FL5 Intercooler Reference Thread.I agree with you on the charge pipes. Was it a part on the PRL charge pipes that you had this problem? (I just received PRL charge pipes...
-
Nikw91 replied to the thread FL5 Intercooler Reference Thread.Glad they got rid of the lag their bar and plate added. You happy with it? Those end tanks are beautiful
-
It’s okay, you got the HKS so you’ll be fine
-
Nikw91 replied to the thread FL5 Intercooler Reference Thread.it looks almost identical to their bar and plate. I am curious how it does on the track. The fins are just so small.
-
Nikw91 replied to the thread Choosing a radiator for occasional track days, help.i ended up making a ton of changes to my setup including a CSF radiator and I was able to run all out for a 20 minute sessions in 87...
-
I'm curious how the car knows the gas pedal broke off to trigger DTC's. Unless somehow the potentiometer in the accelerator housing is...
-
That definitely is kind of impressive, I don't think I've ever seen someone break a pedal off before. Not sure if I've ever seen an...
-
That is impressive that managed to break.
-
Didn’t even know this was possible
-
Nikw91 replied to the thread P0128 w/ Spoon Theromstat - Should I avoid a PWR Radiator?.You won’t throw a code for a intercooler and/or radiator upgrade. A different thermostat will throw a code as you’ve found out. If...
-
Nikw91 reacted to 0x1d7's post in the thread P0128 w/ Spoon Theromstat - Should I avoid a PWR Radiator? with Like.
I have a P0128, know the cause and will be going back to the OE thermostat to resolve it, at least until I can jailbreak the ECU...
-
Sounds like you're driving the car as it was intended. Hats off to that.
-
Lol, I daily it, but work from home. So most of my driving is for fun and there are a lot of twistie roads and long on ramps around...
-
9k miles is insane LOL
-
My rear pads were down to almost metal at 9k miles. Up by you there are a lot of twistie roads and driving them hard will eat rear...
-
Brother, I am saying this with passion in my heart. No hate whatsoever. Exhausts. Especially for this platform, I could summarize to...
-
If you don't mind the stock ride height look then there's no need to lower it. I'm lowered on spoon springs and can confidently say that...
-
Honestly dude, I think it's one of those mods that just opens the door to more frustration in the future...
-
Honestly, before proceeding any further you should watch this video, just be aware it's generalized and many of the concepts covered...
-
There's not a single part to throw at the problem that will fully resolve anything. I'm starting to go down this rabbit hole now as...
-
Nikw91 replied to the thread HKS Exhaust diameter.You switched to a 3” exhaust? You could tell/feel a difference?
-
If it’s 3 inches and good quality without the JDM tax, then I guess none of them are the exact spec you’re looking for. They have strict...
-
I vote remark
-
Nikw91 replied to the thread HKS Exhaust diameter.What's wrong with the 27 won exhaust?! Was starting to kind of lean towards Remark exhaust. They seem to be good quality, reasonable...
-
Yeah! 27 won, and have a bōsōzoku exhaust while you’re at it 😂! Those teething issues are really something—nothing you do seems to help...
-
It depends on the turbo but probably around the 450whp is when a true 3 inch exhaust starts to come into play. 27won, Functionwerk...
-
Nikw91 replied to the thread HKS Exhaust diameter.Yeah, completely agree. So when does the stock exhaust start causing back pressure issues? I know of one person around the 500whp...
-
True the current HKS exhausts on the market won't fix much. Most get the HKS exhaust system for the sound and not necessarily the power...
-
Nikw91 replied to the thread HKS Exhaust diameter.1. I apologize they way I might of came off in my reply. Didn't sleep much due to a teething 10 month old and replied while I was still...
-
1. Specify what BIG TURBO you are referring to. G30-825, Kuro+, RV660? 2. Based on this assumption you are going to support this with...