Recent content by Xmetal

Driver mod always come before car mods. Everything is a compromise - know what you're giving up before making any changes. Don't get fixated on weight saving, especially on a 3200 lbs street car. Do you noticed any differences in driving dynamic between a full tank of gas vs half a tank...

You should research tires also if you're so concerned about weight. Different manufacturers can varies up to 5lbs per tire!

Awesome! Did you open up the seat and squeeze it inside like post #1 above (in place of that foam mat)?

I'm not sure I understand the purpose of having a huge intake tube and having to mess with recalibrating your MAF. The only reason I can think of doing this is so that Cobb can sell you their tune to go with it. Unless you're going to a big turbo, you are still "necking" down to your turbo's...

All I see is that BIG red X across the production date that indicates Do NOT ship - Did not pass quality check! :dunno:

It's toe-OUT that wears the inner edge. Toe IN would wear the outer edge. People often associate negative camber with inner edge wear as that's the most obvious visually. However, often overlooked is toe settings. Just a smidge toe out with 0 camber will eat through the inner edge faster...

Those spoon flatbeds are big bucks - Baller :cool:

It's really odd that all of us is getting different issues/results for mostly trying to doing the same thing under the same firmware/software version :dunno:

If it's a rock in the dust shield, why would the noise go away when the brakes are applied? Wouldn't the sound always be present regardless if the brakes are applied or not? If the rock is wedged in there, it should be constantly making noises, wouldn't it?

It should not take more than 30 seconds to get to step 2 as shown in the screen shot below. BTW, how did you do a factory reset the infotainment?

That's the issue with "hunting" these unfortunately. That's why I was so excited to be able to spot this last week! The only other option, which I refuse to do, is to pay a scalper on ebay :mad: Oh...in case you are not aware, this is not placed on the pegs where you would normally find your...

Filling in the VIN worked - Thanks for that! I'm getting an "No updates" message now. Edit: I was using a 32GB drive formatted to FAT32 and the VIN data was missing. I'll try to find a 16GB drive next time to see if all the fields get filled in properly.

That is really weird to have it happen to two different modules and in different areas! I don't think I've ever seen anyone mentioned this happening anywhere.

Mine is still showing that I have a corrupted json file? My car is a March 2025 build and the audio version is also 77CA-0068-121

This one is currently out in the wild - go hunt it down! Not sure if it's a Walmart exclusive, but that's were I found it on the "Legend Tour" display (not on the pegs).