Search results

That's disappointing to hear, at least the suspension on this car is really easy to work on. I would definitely install that Whiteline rear bar, and if you're so inclined try and find a used set of OEM FK8 front springs.

I'd really like to see the difference between the HVI and the Stage 1 on the dyno, under the same conditions.

I'm pretty sure Honda put some artificial turbo lag into the stock tune of the Si. Hondata and KTuner both have "quick spool" option settings. I think they build in the slight lag to make it so you feel a boost hit, but in reality just makes the car slower. As a side effect it makes the skinny...

You have to cut the rivets off using a die grinder or similar tool. You can also just order the OEM 10th gen Si brackets, and the accord endlinks like most of us do.

Yea both sets of Tein springs have rates that are far too soft. They are more geared for people that are looking for looks and supple ride quality, but not so much for people looking to rail some corners on a backroad. I think the Swift springs are probably the best off the shelf lowering...

Since getting the Si I've always felt it handled really good for a stock car, it definitely could be way better though. I wanted a bit more spring rate and body motion control without going to aftermarket lowering springs or coilovers. I got the Si as a really fun to drive daily that gets good...

@Vincent@27WON Since you have experience with both the 10th and 11th gen civic brake systems. Do you know if 10th gen stainless steel brake lines will fit the 11th gens? I'm looking to upgrade the brake lines on my 11th gen Si.

I installed the cable bushings a few weeks back and recently installed the base bushings. I only needed to remove the battery and battery tray for the cable bushings. Swapping the base bushings for the 11th gen are way easier than on the 10th gens. I only had to remove the shift knob and the...

I get a resonance buzzing when accelerating between 3-4k rpm. I can't really pinpoint the location but its coming from somewhere around the passenger side dash area. I'll try the vents and pillar when I have the wifey in the car next.

I just got around to installing a set of Acuity Instruments shifter cable bushings into my 2022 Si. The install was very easy and straight forward, took about 25 minutes. You just need to undo and remove the battery and battery tray, remove the cable and bushing retaining clips, pry out the...

What does shipping on this system typically cost to the States?

Going to a larger diameter tire will essentially do the same thing as changing your final drive.