Search results

Oil temps were nothing crazy. Didn't see anything higher than 255 due to the low ambient temp. I ran all 4 sessions with the long press traction control off. Bingo! It only happened in my longest session. Came back to pit with less than a quarter. I refill before every session, but the tank is...

"iSYFIX White Vinyl Numbers" from Amazon. I don't recommend them because the leftover adhesive is difficult to remove.

Track Details: 54-66 degF and cloudy. 1 track day with Chin Track Days. 4 30-minute sessions. First time at COTA. Mods: Falken Azenis RT615K+ Endless ME20 Front Brake Pads Paragon P3 Rear Brake Pads PRL HVI Catted TSP DP PRL Front Pipe Acura ADS Module Front Whiteline Adjustable Ball Joints...

How many track days on these rotors?

Watching this thread. This is the best sounding exhaust I've heard for the FL5. Never had intentions on parting from the OEM exhaust until now.

Yup. I was aiming for -2.5 (middle adjustment). I think max settings would place it around -3.8 with pulled pins

Recently installed whiteline adjustable ball joints (-2.6 front camber) and had some fun at MSR Houston & Harris Hill. Also just realized you can fit a FULL set of wheels and a car seat in this car. Incredible.

RF03RR here. Best bang for your buck. Just under $850 for the set.

Installed some adjustable ball joints and went for an alignment. Would love some feedback. Doing my 11th track day on this car this weekend.

I wish I would've read this before installation. Lots of amazing tips here. Unfortunately, I used an impact only for removal. Luckily didn't have any issues putting everything back together. I only removed the 19mm bolts and T50 Torx. I was able to pull the hub out, and upward to expose the...

Went to Endless ME20 pads & installed adjustable ball joints. A huge PITA. I plan to make a thread about the hacks I learned to make the install easier.

Thanks for this! I took your advice. I found a gasket with a similar dimension. https://www.napaonline.com/en/p/EXH31737 I extended the bolt holes and increased the ID to 3" Final product was not too shabby It fit like a glove. The material is similar to the PRL original.

Has anybody been successful *quickly* sourcing an alternative exhaust gasket like the one from PRL below? Specifically need the front pipe to exhaust gasket. I need a quick solution as I have track days planned for next weekend. I recently had a bolt back out on the mating flange from the PRL...

I had the same symptoms after a track session. Rotors appears to be glazed so I used a flex-hone to wipe off the pad residue from the rotor. Then I lightly sanded down the pads using sand paper. I started the re-bedding process all over again and all was new again. Just got done with a track day...

Will do. Thanks.

Thanks for the feedback. You're right. It's more of a hybrid option for light track use. Just updated the chart.

Amazing! Thanks for sharing

Updated: Added Dixcel compounds - 8 total. I'm also curious to hear more about the Z-type pad. First time hearing about the brand.

I bought a pre-owned set of Titan7 T-R10 wheels as a track set. I cleaned them up, and changed my mind. Wheel size is 18x9.5 +45 wrapped with Michelin PS4S 265/35/r18 with 6.5/32 tread life. Date codes are 3521. One tire is splitting and thus undrivable. Center caps included. Asking $1,500...

Updated: Added Counterspace Garage (CSG) compounds. Thanks.