Search results

If you’re stuck at home and have the time, you can get under the car and wipe everything down you can reach. I did it on quick jacks and it took me about 4 hours, just relaxing as I went from front to back.

Agreed, I much prefer a linear throttle response

I have been, and it’s awesome

15mm (Bonoss) fit w/ no issue

This happened to my dad with his 991.2, serviced at Porsche, at least that’s exactly what they told him was the cause. In his case, he was driving only days after the servicing, smelled burning right as low oil warning came on, pulled over and had dealer tow it back to their shop. They had to...

Scott @Mishimoto gave me this response: We have not tested the capacity, but it is roughly the same as the OEM. Please note that changing the capacity may affect the pressure. This product is designed to work with the Type R motor while maintaining stock fitment and performance. I wasn’t...

I got Mishimoto’s red for $265 back in April ‘24, it’s gone up in price since then. It comes with the hose fittings welded to the tank and a 1.3 bar cap, if you want to count those as features. Mishi doesn’t post the capacity, so I’ve asked them if they can measure to verify as I didn’t...

Here’s another dry filter to try, the dimensions appear to be a fit: https://ramairusa.com/proram-medium-152mm-id-proram-universal-cone-air-filter/?setCurrencyId=2&sku=PR-CC-194-150

maybe you could chill out a bit, like, for a few years

Was there a video for connecting the trans cooler? I couldn’t find one thanks

I doubt it would be anything that couldn’t be taken care of with grease/wax remover, if I take them off and try something else, I’ll post it up

this absolutely will not fit the PRL HVI

yea I started from the bottom corner of the speaker near the center of the door, and slowly worked the thin strips around the speaker, tucking the edges in with my thumbnail. There is overlap and I cut excess so that one would cover the other. I have noticed a couple of them peeling off at an...

Originally the inlet worked with the stock accordion: And PRL used to sell a silicone hose specifically to replace the accordion for connecting the inlet to stock box: But when PRL came out with HVI, they sold a separate hose kit than what initially came with the inlet, for connecting the...

The PRL inlet works

I’ve been running one of these on my Focus ST, along with a PCV (dirty side) catch can for about 10 years, tuned for about 5 years up to ~24 psi max boost. Early on, mostly stock, I was noticing some oil traces going to the turbo inlet from the CCV breather that, most of the time, lets clean...

what links?

Grok has this backwards: Dual units for targeted capture (PCV for boost/load conditions, CCV for idle/low-load). Each ~0.5-1qt capacity; modular for easier placement in the FL5's tight bay (e.g., PCV near turbo, CCV near valve cover). It’s not reliable to ask A.I. things unless it’s not...

I have not driven an S2000, but it’s definitely more of a step in that direction. The stage 2 is subtle, even more so for me without the shorter throws. I like the buttery smoothness with just a hint more engagement in contrast with my FoST short shifter which has a lot more kathunk. If stage...