If you're searching for a "volt jack", probably won't find anything. I think you are looking for a battery tender or charger.
Big fan of using NOCO myself.
I've bought the USB C hub before to see if the connectors are any different to cars that did not come with USB C. They are definitely very different and is not something you can just buy and swap over.
Spoon is probably the most expensive one, then there's Mugen, J's and I believe Cusco may be coming out with one too.
TSP has one too and its probably the cheapest, I have it, but I only have the front installed right now. The difference it makes is honestly negligible. I'll probably get the...
Did not know Blitz made one that installs on the rear subframe. That's a lot better and easier than having to remove the rear bumper. Can't wait to hear your feedback on it.
Yes, back of the pads, ears and on the slide pins for the rear brakes. The silicone brake grease works really well with the Wunderladen rear bushings.
I haven't had to deal with winter road salt in a long time, but yeah a little bit of anti-seize on the hubs helps.
Do not use anti-seize on your brakes.
I would say not to use anti-seize for any brake parts. Use brake grease. I've always used Permatex.
https://a.co/d/0arp8qDA
Got the Strix vent adjuster caps and radio volume knob delivered today. I already had the black climate control knobs from Honda. They all tie in really well together, they look really good and are made very well. Much better than the silver. Thanks @CTR !
I just saw you posted over there. Your post there didn't even mention that you took it to the dealer to have the the MAF and throttle body cleaned. I would try to cycle it a couple more times, drive around for a little bit, turn it off, wait and drive around again. Sometimes it takes a few...
If it was an issue that came up after going to the dealer, I would take it back to the dealer, but I don't think cleaning the MAF and throttle body would cause a CEL for those things, but it could literally be anything since so many things can cause an issue and throw an error. Also, just so you...
NGL, I was confused at what you were making at first and then I realized what it was based on the shape.
This is what I have, but I dig that you're taking the initiative and have the ability to make your own. Looking forward to what you come up with.
https://a.co/d/00txoLwY
I think it should be fine. It seems like its the same one that @Unity Performance is running on Humza's build, so he may be able to give insight on the front plate mount since he's ran it longer.
TBH, I'm not too worried about it, I either won't take it off and just leave it, or replace the...
Installed a no drill front license plate mount for the FL5. Made me a little paranoid the other day after having a Sheriff's patrol follow me turn for turn for a good few miles.
TOTLYLGL No-Drill Front License Plate Mount For 23+ Honda Civic Type R V2
Also gave her a wash.
Driving around in a car without the driver window just looks like you're driving around with the window down, less conspicuous than a broken door handle.
What @I♥LCY described is still just part of the keyless entry system, there are no sensors to trigger a conventional alarm. The only alarm...
These cars do not come with a factory alarm, its a keyless entry system. Its usually the dealers themselves that offer 3rd party alarms like KARR, do not buy KARR. There is an immobilizer, but it only would go off it they did something to trip it, like use an incorrectly coded key fob. Thieves...
They probably are the exact same or close to it. A lot of the times when companies have their products made and manufactured in China, the Chinese company ends up selling their own version for a lot less.