[DIY - 3D Print] FL5 Vampire Fangs

[aqf23]

Hi everyone,

Sorry for the late notice—this was a spontaneous idea from last week, and it took me a few iterations to get the fitment right. I wanted something completely removable, secure for driving, and clean-looking.

Here is a 3D-printable Halloween vampire fang kit designed specifically for the FL5 front grille:

• No damage / Paint safe: Shall be used with white electrical tape on the piano black trim (which also blends the gap nicely) and fabric wiring tape on the grille to protect the paint and plastic.
• Secure mounting: Anchored with up to 5 zip ties (3.5mm works best) and clever internal locking guides so they won't fly off.
• Easy printing: Support-free design, works with 0.4mm or 0.6mm nozzles in standard PLA. Left and right sides included.

You can find the free files on Printables here: [Link]

Note: The design includes a subtle watermark and a non-commercial tag. Please respect the creator's work and don't sell physical prints wihtout consent.

Hope you guys like it, and Happy (belated) Halloween!

Sponsored

 

[aqf23]

UPDATE: Teeth were installed, the zip-tie position was perfect, and the tooth-locking mechanism worked perfectly. I used 3,5mm wide zip ties. Put 3 layers of white electrical tape over the black trim (behind the teeth top part) and felt tape in the grill where the zip-ties go. I already removed them, and everything was good; it held high speeds and bumpy roads.

If anybody is interested in a different tooth design, it's easy to change, as I design everything parametric, so as long as it does not need a different backplate, I'm happy to upload different designs.

Photo of them installed: