i installed a PCV Radium catch can shortly after purchasing my car. i periodically check the dip stick and there's definitely a small amount of oil in there.
Searching for some wise counsel on how to install a CTEK battery tender. In particular, there are some conflicting views on whether you should connect the negative eyelet to the chassis as opposed to the negative terminal on the battery. Is there a definitive view on what the best approach is...
those tabs are there only there hold the plate in place. i've had a really good look from above and below (up on a lift) and the only way to get to the hardware (which faces the radiator) is to remove the bumper or grill. both are a pain. according to my dealer all Aud cars left the factory with...
see here for the mesh: https://www.amazon.com.au/dp/B09FPTRLHM?ref_=pe_19115062_429603572_302_E_DDE_dt_1
any automotive mesh will work - the finer the better. mine actually measured in at 5mmx3mm. all you need to do is remove the two middle phillips head screws and you can pull back the rubber...
devised my own solution using automotive mesh ($30 australian from amazon). very happy with the result. it really should have come out the factory this way.
Hi all, just picked up my FL5 Type R here in Australia and was wondering if anyone sells mesh inserts to stop rocks being spat out the fender vents? driving back from the dealer i could hear them rattle their way down the side skirts. I know that Porsche includes mesh on the GT3RS vents. odd...
Hey mate, i'm in australia and went through the same issues trying to find a RHD supplier. i ended up ordering through https://f1mats.com/. cant yet vouch for the quality as they are in transit. However, the seem to be the only supplier with a good rep that does RHD.