SRP racing pedals

jay_fk8

Member
Joined
May 5, 2020
Threads
1
Messages
18
Reaction score
62
Location
Los Angeles
Vehicle(s)
FK8 LE, FL5
Just installed these today and I really love how they turned out. I didn’t like how the stock pedals looked, the FK8 ones looked better in my opinion. But the good thing about the FL5 pedals is that the clutch and brake just slip off, no rivets like the FK8. The gas pedal is just a metal plate held on by four tabs that bend around the pedal.

He didn’t have a set yet for the FL5 but after contacting him and a few back and forth, we got the sizing down. If you guys want the same ones these are the hex design in the shiny finish. He has a few different styles to choose from.

11th Gen Honda Civic SRP racing pedals IMG_5861


11th Gen Honda Civic SRP racing pedals IMG_5860


11th Gen Honda Civic SRP racing pedals IMG_5859
Sponsored

 

TopazM3

Member
Joined
Jan 9, 2018
Threads
0
Messages
6
Reaction score
5
Location
KY
Vehicle(s)
RAM 1500
They look great. I’ve used SRP pedals on five different cars. Love them. They’re great for track use because the texture keeps your foot from slipping. The wider gas pedal helps with rev matching.
 
OP
OP
jay_fk8

jay_fk8

Member
Joined
May 5, 2020
Threads
1
Messages
18
Reaction score
62
Location
Los Angeles
Vehicle(s)
FK8 LE, FL5
nice, how much? diy?
Prices start from $79, they have different options and finishes you can go with. I don’t have a DIY but it’s fairly easy. The stock clutch and brake pedal covers slip off, the gas pedal has four metal tabs holding it on, you just have to bend the tabs and remove the metal pedal cover. I worked with them the develop this set because they didn’t have a 2022+ Civic pedal set yet and they wanted it so the holes on the stock clutch and brake pedal (there’s 3) to line up with the holes on their pedals. For my set, since it was the first set they made for this car, the single bottom hole didn’t line up perfectly, the top holes did though. I sent them feedback regarding the bottom hole and they probably made adjustments to it so it might be a perfect fit now. But for me it was a simple fix with a drill. The gas and dead pedal use self tapping screws.

link here: https://www.srpracing.com/products/honda-civic-2022-racing-pedals?variant=47431891976504
 

Bonito

Senior Member
Joined
Sep 1, 2022
Threads
7
Messages
273
Reaction score
263
Location
Atlanta
Vehicle(s)
2023 Civic Type R
Prices start from $79, they have different options and finishes you can go with. I don’t have a DIY but it’s fairly easy. The stock clutch and brake pedal covers slip off, the gas pedal has four metal tabs holding it on, you just have to bend the tabs and remove the metal pedal cover. I worked with them the develop this set because they didn’t have a 2022+ Civic pedal set yet and they wanted it so the holes on the stock clutch and brake pedal (there’s 3) to line up with the holes on their pedals. For my set, since it was the first set they made for this car, the single bottom hole didn’t line up perfectly, the top holes did though. I sent them feedback regarding the bottom hole and they probably made adjustments to it so it might be a perfect fit now. But for me it was a simple fix with a drill. The gas and dead pedal use self tapping screws.

link here: https://www.srpracing.com/products/honda-civic-2022-racing-pedals?variant=47431891976504
Any clue if FK8 pedals would be able to swap into the FL5 or are they too different? Otherwise, I might go with SRP as well.
 


Fanatic

Senior Member
First Name
Sonny
Joined
Oct 31, 2023
Threads
7
Messages
471
Reaction score
371
Location
Plano, Texas
Vehicle(s)
'25 C8 Z06s and more!
Sweet. Thanks for sharing.
 


mparra11

Senior Member
First Name
miguel
Joined
Jan 20, 2019
Threads
3
Messages
53
Reaction score
21
Location
ohio
Vehicle(s)
type R
I got the black hex to try and match our air vents design. I think they feel a little nicer and look a lot nicer.
1000005041.jpg
1000005042.jpg
1000005043.jpg
Can you take a zoomed out Picture? See how it all ties together
 

Chilly613

Senior Member
Joined
Nov 5, 2022
Threads
3
Messages
510
Reaction score
485
Location
Southern California
Vehicle(s)
2023 FL1 Civic Sport Touring 6MT
Build Thread
Link
He skipped over actually installing the gas pedal...
He described what he did, but probably didn't film it since he's probably doing the install by himself and drilled it while the pedal was still installed in the car rather than removing it like some other videos of people installing SRP pedals.
 

Brittania

Senior Member
First Name
Brian
Joined
Feb 11, 2024
Threads
9
Messages
224
Reaction score
294
Location
North Carolina
Vehicle(s)
2024 FL5
On the gas pedal It's a cover you have to remove, or you can just screw through the rubber part of the cover
 
 







Top