Sponsored
blueroadster's latest activity
-
blueroadster replied to the thread New SBX Prototype Front Pipe.Looks sweet...IMHO, I would suggest a wider flex section. Titanium should also not be considered at all for the downpipe/front pipe... -
blueroadster reacted to Cueyo's post in the thread My First Molding Hood/ICB Motorsports experience with
Like.
I like picture #4 the most, but I think you should also have the built-in snorkel area exposed. -
blueroadster replied to the thread I hate seeing posts about Type R's getting stolen. Here are a few good/inexpensive products to keep your car safe!.I do not have a set but have heard that the locking lug nuts from Advanced Wheel Locks are very difficult to remove without the lock key.
-
blueroadster reacted to tezzasaurusrex's post in the thread 🚀 TRUSTALIGN - Time Attack FL5 Build Journal with Like.
Successful test session completed. PB posted on old tyres and not full ethanol. Data showing ECT never exceeding 90°C/194°F even at... -
blueroadster reacted to zumbooruk's post in the thread If anyone is looking to score a set of Racing Black front seats... with Like.
I "converted" mine to black currently $29 after coupon... https://www.amazon.com/dp/B0BN5CMRSY
-
blueroadster replied to the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement?.After further research, I went ahead and ordered the Plazaman charge pipe kit with a raw finish. Options that upgrade the throttle body...
-
blueroadster replied to the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement?.Cool and thanks...Something that I am considering and not bad for around $700.00 USD shipped to the east coast. Do you have the piping...
-
matte all day under the bay because it's easy to keep clean hahaha. -
blueroadster replied to the thread Kazuo_WFC 2025 Civic Type R build.Should decide in the next few days but definitely going with the Nickel anodized parts. I sent them an email inquiring to see if they...
-
Installed the custom titanium badge from https://www.instagram.com/mugenfl5r/ I already sent him a 2nd order to do a badge for the...
-
I dropped off the car Thursday evening at Santo's house so it'll be good to start working at 7am. He said he could do the cams, valve...
-
blueroadster replied to the thread Kazuo_WFC 2025 Civic Type R build.Looks sweet...For comparison, here is a PIC that they sent me of the small weave carbon kevlar with a polished finish. I think the one...
-
-
Pracworks intake manifold arrived! I ordered mine through Michael via email to get a custom order in. Great customer service all around...
-
blueroadster reacted to ModJPB's post in the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement? with Like.
Stay with the OEM throttle body. It's a turbo charged car, it gets its air by pressure not so much free flow. I did a larger tb on my...
-
blueroadster reacted to r513ctr's post in the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement? with Like.
Plazmaman make a piping kit now also https://plazmaman.com/product/honda-civic-fl5-type-r-high-flow-piping-kit/
-
blueroadster reacted to Chilly613's post in the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement? with Like.
It would probably still be the same options, its usually the inner bore and the butterfly flap of the throttle body that's larger. The...
-
blueroadster replied to the thread SOLD Fujitsubo Titanium Exhaust FL5.Sweet deal for an awesome titanium exhaust upgrade. I've been using the same for over a year and consider the Fujitsubo to be the gold...
-
There is a PCV valve in the valve cover, Part no. 17130-RPY-G01 Vacuum from the intake manifold draws flow from the valve cover, with...
-
This is just fine to reach with a socket on an extension:
-
blueroadster replied to the thread Improved Racing CCS Catch Can.Appears so on the CCV side however, the PCV side has shown value in installing a catch can. I decided to order the Improved Racing CCS...
-
Selling my lightly used Fujitsubo exhaust for the FL5. Still in immaculate condition. Comes with gaskets and bolts. Price is $3000...
-
I would highly recommend anyone looking for a quality exhaust to consider Fujitsubo. I previously had Apexi on mine along with a TSP...
-
blueroadster reacted to SBX Performance's post in the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨 with Like.
Production Update I want to give everyone an honest update on the first production run of the SBX downpipes. Material delays were a...
-
Oh. These are the ti screws I got off amazon https://amzn.to/4q49jjd Have to buy 2 sets. They are cheap and still look brand new...
-
I replaced mine right away with titanium ones, the ones that came with were cheap junk. I have had it for way over a year and its been...
-
blueroadster replied to the thread WOT Performance: HPT Cooling Plate.Update after having the cooling plate installed for well over a year. Only issue noticed is with the screws starting to rust and shear...
-
-
blueroadster replied to the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement?.Cool and thanks. I am curious as to what options are available if one were to upgrade to an oversized or Bosch 74mm throttle body.
-
blueroadster replied to the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨.My guess...You are that 1 person giving yourself issues about the wait time. :) Please keep posting production updates along the way...
-
blueroadster replied to the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement?.Bump...Part in question is number 8 in the below diagram: Is anyone aware of any aftermarket upgrades for this particular part...
-
-
blueroadster reacted to SBX Performance's post in the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨 with Like.
Welcome man!!! Welcome I figure nobody gets to see behind the scenes mostly cause companies hide that they make them overseas LOL so I...
-
blueroadster replied to the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨.Perfection is worth the minor wait IMHO. Looking awesome and I appreciate you sharing PICs while these are being built.
-
Radium's CCV system created too much crankcase back pressure on my ride under tracking/modified boost conditions causing the dipstick to...
-
I am not doing it, I am leaving the CCV side alone.
-
blueroadster replied to the thread Improved Racing CCS Catch Can.Thanks and that sucks to hear. Thinking some more, it makes sense to me now for the Improved Racing CCS to be installed on the PCV side...
-
-
blueroadster reacted to jtlctr's post in the thread Anyone Want to Share Data Logs w/Kuro Turbo? with Like.
Nobody could ask for a better explanation! Thanks for taking the time to educate us.
-
blueroadster reacted to D-RobIMW's post in the thread Anyone Want to Share Data Logs w/Kuro Turbo? with Like.
Hello, Now that I've had a chance to decompress a little from the work week, I'll try to keep this relatively short and direct to the...
-
blueroadster replied to the thread Improved Racing CCS Catch Can.Thanks for the explanation...My last post was a confusing mess and I was not aware that the PCV valve was in the cylinder head cover...
-
-
blueroadster replied to the thread Improved Racing CCS Catch Can.In the OEM configuration, it is simply a straight hose connection between two points (out from the head and directly into the intake...
-
blueroadster reacted to SBX Performance's post in the thread SBX Performance Downpipe Pre-Orders Are Now Live with Like.
I Thanks! Took about a year and six different designs to get here but I’m really happy with this version. One thing I specifically...
-
blueroadster replied to the thread SBX Performance Downpipe Pre-Orders Are Now Live.Looks like a work of art. Really digging the use of the transition cone off of the Gesi and taper off of the other end of the lower...
-
blueroadster reacted to SBX Performance's post in the thread SBX Performance Downpipe Pre-Orders Are Now Live with Like.
Production Progressing Well. Lower elbow to front pipe flange and to transition cone to Gesi cat. Nothing but smooth transitions.
-
blueroadster reacted to SBX Performance's post in the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨 with Like.
Production Progressing Well. Lower elbow to front pipe flange and to transition cone to Gesi cat. Nothing but smooth transitions.
-
blueroadster reacted to Chilly613's post in the thread What did you do to your FL5 today? with Like.
I'm really digging the two tone, with the white on top and black underneath.
-
Thanks, I wanted to do something to help it blend better into the car and also look better without the rest of the kit as I don't love...
-
Mugen front lip installed, I'm waiting on new rubber seals since my painter accidentally painted them. I'll fine tune fitment the best I...
-
blueroadster reacted to SBX Performance's post in the thread SBX Performance Downpipe Pre-Orders Are Now Live with Like.
I will have updated pictures today of the production :) going to the shop now
-
blueroadster replied to the thread SBX Performance Downpipe Pre-Orders Are Now Live.Sweet...Thanks for the update. No OEM heat shield bung connections for me.
-
Hello everyone. After a lot of tinkering on this platform since I purchased it brand new in July of 2025, I just got around to taking... -
blueroadster reacted to SBX Performance's post in the thread SBX Performance Downpipe Pre-Orders Are Now Live with Like.
Full Swing Production this week!! For those that pre ordered thank you! It will be in your cars before you know it!
-
blueroadster reacted to SBX Performance's post in the thread 🚨 COMING SOON: SBX Performance FL5 / DE5 Catted Downpipe 🚨 with Like.
FULL Production begins this week!!! Not only my downpips but also PTP is hard at work getting the SBX Downpipe Blankets and Turbo...
