Honda Hack / Root: 11th Gen - Work In Progress Discoveries

[Stocki011]

In Europe we also have this annoying speed limit reminder using traffic sign recognition. I can turn off traffic sign recognition, but after every restart it turns on again. EU regulation, they said.
I hope someone can figure out how to hack this.

I think, Duca, you might have the same problem?

Greetings from a fresh first time Honda Owner
also very new to Forum-Culture in general

Anyway, in my few days of owning an FL5 Type R the above mentioned speed limit reminder (EU-Term: Intelligent Speed Assistent / ISA) has proven to be very irritating almost all the time.

Seems to be a new 2024 'Feature' in the EU.
How does this work for you guys in the US/CAN?

Looking forward to a possible solution for this specific problem.

Sponsored

 

[Stocki011]

I think you can only adjust the range for when it flashes. For some reason mines constantly being triggered.

Have you found a menu to adjust this tolerance?
Other manufacturers (Mazda, VW) seem to have such menus

 

[madmax80]

Yes, they have such menus because they don't have "Honda Sensing" department. For them, the purpose is "safety first" no matter what...

 

[Integra23]

Have you found a menu to adjust this tolerance?
Other manufacturers (Mazda, VW) seem to have such menus

It's either on the headunit or the cluster. I adjusted mine at one time but I think it's capped at +10 or +15 mph.

 

[Ak-D0V]

So this happened yesterday..
But still can't get the touch screen to work. I used the phone's screen mouse control to get around. If you're wondering, yes a physical keyboard/mouse works with this setup but it's not practical

 

[the1dynasty]

Any progress on this? I have an Integra but I'm sure if this gets figured out on the Civic, then it would be the same for my car too.

 

[17SIYoDood]

Unrelated KINDA. But we all have the Bose headunit which means different wiring harness because Honda suddenly doesn’t like DIY. So I had my Asian friend email Seicane and idoing in their native language so there was NO confusion. They even responded as such… they both said if anyone with the Bose 11th gen headunit emails them before ordering, that they have a harness that fits the Bose so it’s completely PnP. Even though they have full money back guaranteed. I’m waiting until I have EXTRA funds to be the Guinea pig I guess. Unless someone on here wants to be the first and post pictures and video of the install…. I haven’t seen a single picture or video of ANYONE with a Bose system installing one of those android plug n play headunits. It’s always base models or sports. But yea. Here are the links. I’ve had idoing in my 21 WRX. If had seicane in my 22 Camry and I also had Tey’es in my 2023 DD Altima. All great headunits. T’eyes have been the best though if I’m being honest.

https://www.teyes.com.au/

https://www.idoingstereo.com/produc...MultimediaVideoPlayerNavigationGPSNo2din.html

https://www.seicane.com/for-2022-ho...on-radio-with-bluetooth-hd-touchscreen-h2a086

 

[trycatch]

Hello, how the output of dex conneced to the unit? @Ak-D0V

 

[hialeahzbg]

anyways to disable the active sound from this menu without having to unplug it?

 

[Lukeklaas]

I would love if someone could make alternate dashboard setups, like retro themed or fighter jet lol

 

[isosa28]

Here are some screenshots and methods to access the two hidden screens I have found:

First Hidden Screen (Diagnosis Menu):
Similar to what was used on the 10th Gens: hold HOME + POWER + BACK:

That brings you to a screen that looks like this:

From this screen (or from the Detailed Information & Setting screen), Hold BACK + POWER + FORWARD for about 5 seconds for a new hidden menu:

The thing to note here, I think, is the USB mode. It allows you to turn on ADB Mode through the USB port:

It leads me to believe this may be the route that is needed to take in order to take admin-level control over the device.

Here is a video version of showing how to get into the menus as well:

Some progress 2 nights ago.
We just need a working payload for android 8.1 and loaded through the web browser.

 

[TheReal_TimShady]

So this happened yesterday..
But still can't get the touch screen to work. I used the phone's screen mouse control to get around. If you're wondering, yes a physical keyboard/mouse works with this setup but it's not practical

The question is... How? Are you using a dock of some sort?

 

[Integra23]

Some progress 2 nights ago.
We just need a working payload for android 8.1 and loaded through the web browser.

That's huge. How did you sodeload the browser?

 

[isosa28]

That's huge. How did you sodeload the browser?

You will need the following first,
A samsung phone
USB A to USB A cable
USB A to Type C adapter.

First, make sure you have the developer mode enabled. Change the USB mode on the dash to adb mode on the USB.

Second, Go to developer mode and toggle usb debugger then change the USB to media mode, then connect your phone and it will ask you to open the Smart Switch app, open it and click ok on the radio, that will open the web app for you.

Note, download the Smart Switch app if you don't have it.
Also, enable wifi on the radio and connect to a Hotspot.

I can make a video if you want.

 

[Ever98]

You will need the following first,
A samsung phone
USB A to USB A cable
USB A to Type C adapter.

First, make sure you have the developer mode enabled. Change the USB mode on the dash to adb mode on the USB.

Second, Go to developer mode and change the USB to media mode, then connect your phone and it will ask you to open the Smart Switch app, open it and click ok on the radio, that will open the web app for you.

Note, download the Smart Switch app if you don't have it.
Also, enable wifi on the radio and connect to a Hotspot.

I can make a video if you want.

Please make a video

Sponsored