Sponsored
OP
OP
BuntaTypeR

BuntaTypeR

Senior Member
Joined
Jan 19, 2024
Threads
18
Messages
294
Reaction score
417
Location
USA
Vehicle(s)
2024 Civic Type R, Tesla M3P, 08STi, S2k,Rsx-S
Update on the car.
The Bad News: 3rd Gear Grind
The shop tore into the trans and confirmed that the 2nd slider is completely shot. I had a feeling something was wrong because it was grinding at the track and popping out of gear. Before anyone asks, I’m definitely not new to manual platforms (prior cars include an RSX-S, S2K, and an STI), and I always take my time rev-matching and downshifting to protect the drivetrain.

I went to pick up the car, but it's going right back to the shop. It developed a 3rd gear grind just a few days after the dyno session. Interestingly, it didn't grind right after the initial build install, nor did it grind on the dyno itself. Right now, it looks like it could be the gear teeth or the synchros. The shop is opening it up again to find the exact failure point.

What Just Was Just Done:
• Clutch & Subframe: Dropped subframe, R&R clutch. Installed OS Giken HTR Twin Disc Clutch Kit.
• LSD & Tune: Installed OS Giken SuperLock LSD (tuned by Shaftworks). JSR Re-Tune Session.
• Trans Refresh: Honda OEM 1-2 Slider Synchro Set, S.E.S 3-4 Gear Upgrade (1000HP Synchromesh), full tear down, clean, Hondabond, and reassemble.
• Cooling & Maintenance: Spoon Thermostat, HKS Touring Coolant, NGK Ruthenium Plugs.
• Fluids: Motul 75W140 (trans) & Mobil 1 5W30 (engine).

The Path Forward (The Fix):
Instead of chasing minor fixes, I’m taking the tuner and installer's recommendation to bulletproof this thing. We are opening the case back up and installing a heavy-duty gear set.
• PPG 1-5 Gear Set
• Syncrotech 1-4 Carbon Synchro Set
• FK8 Final Drive Gear and Shaft
• Labor (Round 2)

Fingers crossed this finally cures the 3rd gear grind and locks down the transmission reliability once and for all. Will keep the thread updated once the PPG set is in and we see how it feels!

11th Gen Honda Civic BuntaTypeR Boost Blue Build 20261030_163612(1)
Sponsored

 

I♥️LCY

Senior Member
Joined
Sep 18, 2026
Threads
9
Messages
171
Reaction score
138
Location
Inland Empire
Vehicle(s)
2026 Honda Civic Type R
slightly confuzzled, all this was done and you're still experiencing a grind/lockout?

buntatyper said:
What Just Was Just Done:
• Clutch & Subframe: Dropped subframe, R&R clutch. Installed OS Giken HTR Twin Disc Clutch Kit.
• LSD & Tune: Installed OS Giken SuperLock LSD (tuned by Shaftworks). JSR Re-Tune Session.
• Trans Refresh: Honda OEM 1-2 Slider Synchro Set, S.E.S 3-4 Gear Upgrade (1000HP Synchromesh), full tear down, clean, Hondabond, and reassemble.
• Cooling & Maintenance: Spoon Thermostat, HKS Touring Coolant, NGK Ruthenium Plugs.
• Fluids: Motul 75W140 (trans) & Mobil 1 5W30 (engine).
 

blueroadster

Senior Member
Joined
Apr 19, 2024
Threads
45
Messages
807
Reaction score
1,131
Location
MD
Vehicle(s)
2024 Civic Type R, 2026 Passport TSE, 2026 Pilot BE, 1964 Impala SS
Anything done during the build to make the clutch engage more naturally (e.g., CDV delete)?
 
OP
OP
BuntaTypeR

BuntaTypeR

Senior Member
Joined
Jan 19, 2024
Threads
18
Messages
294
Reaction score
417
Location
USA
Vehicle(s)
2024 Civic Type R, Tesla M3P, 08STi, S2k,Rsx-S
slightly confuzzled, all this was done and you're still experiencing a grind/lockout?
Honestly, it just comes with the territory of modding cars. A Type R transmission has so many interconnected components and variables at play, it’s not like brakes or an air filter where you can just look at it and spot the issue. When something goes wrong inside the trans, you can't troubleshoot it on the fly, you're stuck tearing half the car apart just to get inside and see what happened.
 
 







Top