Sponsored
getRIGHT's latest activity
-
getRIGHT reacted to Chilly613's post in the thread Broken strut tower bolt, best way to repair? with
Like.
You’ll need to replace the entire top hat mount. So you'll need to take out the whole strut assembly to replace it. -
Everything has been flipped on its head in the auto industry. The EV rush was a byproduct of regulations. I'm not sure what the deal is...
-
getRIGHT reacted to HondaHoon's post in the thread My First Molding Hood/ICB Motorsports experience with Like.
I am in total agreeance with you brother. $2900 for this hood was too much. I too looked at the Seibon options and was highly motivated...
-
getRIGHT replied to the thread My First Molding Hood/ICB Motorsports experience.This is wild and I really feel for your situation Hondahoon. I almost bought the exact hood you received. I assume you are/were...
-
getRIGHT reacted to HondaHoon's post in the thread My First Molding Hood/ICB Motorsports experience with Like.
They absolutely did for the FK8 brother. However, I cant find anything saying they are making it for the FL5. But your point is still...
-
getRIGHT reacted to Allthingsfl5's post in the thread My First Molding Hood/ICB Motorsports experience with Like.
I was under the impression first molding actually makes js racing carbon hood.
-
The difference between both Magical Fuse and regular fuse is that the Magical fuses metal has a dark coating on it to prevent electrical...
-
getRIGHT reacted to Unity Performance's post in the thread Unity Performance Humza's FL5 Build Thread with Like.
End of July I got word that our GReddy SP stock was ready, earlier than expected, I was thinking closer to mid-September. Beyond... -
Garage Vary recently posted their color-matched polyurethane front lip. This design is completely different from their carbon Glide...
-
Thanks for the explanation...My last post was a confusing mess and I was not aware that the PCV valve was in the cylinder head cover...
-
Added some interior mods and had Sweidit wrap some of the center console trim pieces. I really dig it with the aluminum shifter panel.
-
Lunch break installs are the best. Lol. Installed the High Spark plugs and silencer, along with the Magic fuse set. Still missing the 3...
-
I'd say no probably not. In theory you should not have to touch the wastegate actuator during a downpipe install. However, it is...
-
getRIGHT replied to the thread TSP catted downpipe issue.Did you scan the CEL? What code did you get?
-
getRIGHT reacted to NeRO_CTR's post in the thread NeRO our 25' CTR ....an unathorized purchase that the CFO absolutely ♥️'s with Like.
we hit 30K last week! July 31st :nixon: Aug 1st, as a reward....it ejects the front lip while driving 🤣. Imagine, I'm now road side... -
New front bumper concept from Result Japan, good to see another bumper option coming to the market
-
getRIGHT reacted to ModJPB's post in the thread Throttle Body Inlet Pipe (a.k.a., Upper Charge Pipe) Replacement? with Like.
Stay with the OEM throttle body. It's a turbo charged car, it gets its air by pressure not so much free flow. I did a larger tb on my...
-
Update after having the cooling plate installed for well over a year. Only issue noticed is with the screws starting to rust and shear...
-
In the OEM configuration, it is simply a straight hose connection between two points (out from the head and directly into the intake...
-
getRIGHT reacted to Club Version's post in the thread Club-Version FL5 Civic Type R Build Thread with Like.
Road Atlanta!! My first-ever event at Michelin Raceway Road Atlanta was an unforgettable one! Especially when sharing that experience... -
getRIGHT reacted to phothrottle's post in the thread Spoon Sports Bucket Seats and Harness Bar with Like.
The Spoon harness bar is probably one of the nicest part from Spoon and very underrated.
-
Mugen front lip installed, I'm waiting on new rubber seals since my painter accidentally painted them. I'll fine tune fitment the best I...
-
getRIGHT reacted to J_D's post in the thread New infotainment update, 77CA-0079-121 -RT60CS1 - R1 with Like.
What I did was Switch connection type from smartphone to internet (disables wireless CP/AA) Connect to my phone as a wireless hotspot...
-
getRIGHT reacted to zumbooruk's post in the thread New infotainment update, 77CA-0079-121 -RT60CS1 - R1 with Like.
[OFF TOPIC] Blazing Saddles is one of the best movies ever, and with the most quotable lines, here are a few that I recall, and some...
-
getRIGHT replied to the thread HONDATA has been purchased by EPT.Good news, per this vid. Doug is indeed staying with Hondata. even shows off some new cams and hints at more to come
-
getRIGHT reacted to tezzasaurusrex's post in the thread 🚀 TRUSTALIGN - Time Attack FL5 Build Journal with Like.
More bonnet venting, not because I need the cooling, but for CL reduction -
getRIGHT replied to the thread Okada Projects Plasma Direct Ignition Coils?.They seem to be similar to the Max Orido coils. Here’s a vid of him on the Dyno and impressions with his version
-
getRIGHT reacted to HondaHoon's post in the thread Official CHAMPIONSHIP WHITE FL5 Type R Photos Thread with Like.
Likes/Dislikes welcome! :drive: Build Journal found here: https://www.civicxi.com/forum/threads/hondahoons-fl5-build.65590/ -
getRIGHT reacted to iforgettopee's post in the thread Official CHAMPIONSHIP WHITE FL5 Type R Photos Thread with Like.
-
getRIGHT reacted to tezzasaurusrex's post in the thread Market for a more extreme Type R variant with Like.
I feel like I built this very car (refer my build thread). It has a full interior (albiet 2 seater), practical as all hell (I can carry...
-
getRIGHT reacted to zumbooruk's post in the thread I hate seeing posts about Type R's getting stolen. Here are a few good/inexpensive products to keep your car safe! with Like.
Thanks! I contacted KARR, who were very responsive. I found out that my dealer installed KAAR was the cheapest version (which they...
-
getRIGHT reacted to Chilly613's post in the thread I hate seeing posts about Type R's getting stolen. Here are a few good/inexpensive products to keep your car safe! with Like.
Really hard to get away from dealerships around here where KARR isn't installed. I've removed it from several cars I've had in the past...
-
getRIGHT reacted to Nikw91's post in the thread Swain Tech Coated TSP Downpipe w/ Thermal Heat Insulation with Like.
[ How are you liking the Dream cover? I’m curious on if there are benefits like keeping hot air from the intake or if it just releases...
-
getRIGHT replied to the thread Swain Tech Coated TSP Downpipe w/ Thermal Heat Insulation.I think this is exactly what it does. On warm days (which is often in Texas) after a drive I open my hood in the garage to let it cool...
-
No better feeling than getting overnight parts from Japan. 🇯🇵 took 2 weeks but who's counting.
-
getRIGHT replied to the thread What did you do to your FL5 today?.That was quick! Last time I ordered Max Orido parts from Blackhawk it was a 3 month wait time
-
I added some graphics to the car for Wekfest Seattle. With my friends Integra Type S -
Hey, In this day and age, many times the "obvious" must be stated, even when, in the back of your head, you're telling yourself...
-
getRIGHT replied to the thread WOT Undertray is a beast.Can vouch. I’ve hit multiple things with mine and just keeps taking the hits -
getRIGHT reacted to iforgettopee's post in the thread Clunking/clicking noise after spoon spring install. with Like.
when you retorqued all the bolts down after install, did you do it with the car on the ground? if you tightened everything up with...
-
I just think this entire thing is an excuse to get the 1.5T engine out of circulation so they don't have anymore class action suits. The...
-
I can confirm the OEM coil pack cover from the K20C2 fits very well. (12500-5BA-A00)
-
getRIGHT replied to the thread Spoon floor brace with mounts for 4 point harness safe?.Yep. We called them the Cusco Death Cages. I still cringe when I see them
-
getRIGHT reacted to tezzasaurusrex's post in the thread Spoon floor brace with mounts for 4 point harness safe? with Like.
Spoon is a Japanese "tuner" brand, and Japanese "tuner" brands traditionally have never taken driver safety very seriously. The Cusco...
-
Just in case anyone is still curious, you don't have to take the dash apart to unplug it. I did it just by removing the glove box and...
-
Kind of cool seeing your own car driven by someone else. Only when it's not stollen haha -
getRIGHT reacted to Unity Performance's post in the thread Unity Performance Humza's FL5 Build Thread with Like.
Ended up back on the same Dynojet this morning, unplanned. Big thanks to Nick at Tuning by Nick (@tuningbynick) for squeezing me into...
-
getRIGHT replied to the thread I hate seeing posts about Type R's getting stolen. Here are a few good/inexpensive products to keep your car safe!.Posting this for anyone who has had a KARR alarm installed by a dealership. Turns out they can all be easily hacked. If you have one...
-
getRIGHT reacted to zumbooruk's post in the thread I hate seeing posts about Type R's getting stolen. Here are a few good/inexpensive products to keep your car safe! with Like.
I had the Ravelco installed on Friday The installer was awesome, loves what he does and it shows, answered all my questions, took his...
-
Crossposting from Integratofurms... Alright people, BIG updates! I've been patient and let the last revision settle in for a few...