Installing Powerflex RMM Insert

[cryptolime]

Anyone install the Powerflex insert on their rmm? Having trouble getting it to fit. Do I have to remove the little rubber flap on the engine side? It seems to be in the way.

 

[BigBird]

IIRC, you have to remove those 2 little nubs and then grease it up and push it in. if it doesn't fit all the way in, it will after you bolt it in.

This is the whiteline install
https://www.whiteline.com.au/docs/install_guides/Z5842.pdf

 

[cryptolime]

so i got in touch with Powerflex and they said you do have to remove that piece of rubber. they said they are working on an installation guide after i brought up the issue.

I know that we've already pretty much established it, but just wanted to say I did hear back from our dev team and that flap does come on all of the mounts and needs removed, so we were on the right track. We're going to get a fitting guide made up for these kits that lays all of that out to prevent future confusion!

 

[johnny.silva7]

Anyone install the Powerflex insert on their rmm? Having trouble getting it to fit. Do I have to remove the little rubber flap on the engine side? It seems to be in the way.

How is the NVH after the install?

 

[Jester04]

In my opinion a solid soft mount is the way to go. Even with the added NVH. You might still get wheel hop with this.

 

[cryptolime]

In my opinion a solid soft mount is the way to go. Even with the added NVH. You might still get wheel hop with this.

what mount would you recommend?

 

[Jester04]

what mount would you recommend?

I use the Hasport 62A and with 0 complaints.

Sponsored