NEW Part! PERRIN Rear Motor Mount Insert

[Tothemax]

Is anyone familiar with the torque #'s required to re-tighten the bolt after installing the inserts?

Sponsored

 

[PERRIN]

65ft-lbs for the 19mm bolt and 55ft-lbs for the 17mm bolt

Is anyone familiar with the torque #'s required to re-tighten the bolt after installing the inserts?

 

[zhendexing]

I installed mine yesterday this is a great product!

 

[Lunarsilver17]

65ft-lbs for the 19mm bolt and 55ft-lbs for the 17mm bolt

If i use the CTR RMM on my Si will I need to order a new bolt?

 

[ebatr24]

If i use the CTR RMM on my Si will I need to order a new bolt?

They are the same bolts, same part numbers

 

[JCramin]

Just put my Perrin on m 19 Si today.

Little vibration at slow take off but nothing that's annoying.

Haven't had enough miles to learn anymore yet.

J

 

[Eryan36]

Just installed mine. At the risk of shading into hyperbole, this is easily the best $30 I've spent on this car, and it is hard to imagine a better $30 being spent. Install is super easy, Perrin's instructions are spot on, and the improvement is night and day. I was getting tired of the vague/disconnected/rubbery/loose/inconsistent clutch feel that, unless my shift was perfect, would make the car bog a little bit. This has completely eliminated that and the feel is much more direct. There's more power making it to the wheels, as evidenced by traction control kicking in on me in places it never did before.

As far as NVH goes, cold start idle I can feel just a tiny bit more through the steering wheel and brake pedal than before. I do not feel any increase in the seat. Using brake hold at a stop and taking my foot off the pedal and hand of the wheel, I don't feel any increase in NVH. When I do notice a difference is tapping the throttle at idle, or taking off from a stop. The sensation lasts all of a second and a half, and then I can't notice any difference other than the dramatically improved shifting feel.

I cannot overstate how pleased I am, this has fixed my biggest gripe with the car. Get it, you will love it.

 

[VAN]

Will this fit a 2020 Si? I assume it would.

 

[Centripetal]

Will this fit a 2020 Si? I assume it would.

The one for the Si is different than the Type R. Part number below.
Si : PHP-DRV-100
Type R: PHP-DRV-101

 

[LilToTo17]

The one for the Si is different than the Type R. Part number below.
Si : PHP-DRV-100
Type R: PHP-DRV-101

Yeah because the type r rmm is a tad different

 

[CnoEVO]

Just installed RMM inserts. Minimal vibration if car is crawling from a stop. Better shift feel at higher speeds. My car is a daily driver and I'm keeping it in. Nice product!

 

[ExVTEC]

Ordered mine should be here next week.

 

[kytos]

Installed on @David228cx civic and feels way better, the clutch actuation is more precise and there's minimal engine movement when you left the accel pedal. Vibration is more noticiable at low rpm but once the car is moving the increase is minimal. Definitely waiting for mine to arrive and install.

 

[jscm]

small increase in vibration it actually feels good.I tried heel toe downshifts and it feels positive not sloppy . what I dont like is that it amplify all the rattles on the dash that was already there before the install which I blame honda's and not the insert.

 

[Oberlieutenant]

Just ordered mine from Amazon of all places. 34.00 shipped. ?

Sponsored