Wheels wheel wheels: DECISION made!

[TypeRbuilder]

So the GO TO TDP racing wheel is the TDP6, which looks like the iconic TE37 for a reason! . And we were going to do another bronze version in 18" for the FL5, but....Considering going with something more SPOON looking?!

 

[jtlctr]

The spoon 5 spoke design is my all time favorite! I say do it!

 

[TypeRbuilder]

My thought process on the whole wheel fitment is as such:

Going with a 18" wheel, and going 10" wide for a few reasons: More rubber (track) and then I can run a 53 offset, bringing the wheel outward 13.5mm...BUT/AND....keeping the inside the same as factory.

Going with a 9.5 or 40-45 offset brings the wheel away from the suspension by a LOT...15mm+. I'd rather keep it the same as the factory distance on the inside, keeping the wheels tucked in as much as possible for performance advantages vs having them OUT farther and putting more stress on the mount points.

and at 13.5mm further out, it's flush with the body nicely and the wide (295) rubber will look and handle awesome! And still be quite a bit lighter than factory, which btw are NOT light!

 

[jtlctr]

My thought process on the whole wheel fitment is as such:

Going with a 18" wheel, and going 10" wide for a few reasons: More rubber (track) and then I can run a 53 offset, bringing the wheel outward 13.5mm...BUT/AND....keeping the inside the same as factory.

Going with a 9.5 or 40-45 offset brings the wheel away from the suspension by a LOT...15mm+. I'd rather keep it the same as the factory distance on the inside, keeping the wheels tucked in as much as possible for performance advantages vs having them OUT farther and putting more stress on the mount points.

and at 13.5mm further out, it's flush with the body nicely and the wide (295) rubber will look and handle awesome! And still be quite a bit lighter than factory, which btw are NOT light!

I like the way you think! I’m surprised that there seems to be no other options like this. The only 18x10 wheel I know of that offers a near “proper” offset is the Regimaster, which is a +50.

 

[TypeRbuilder]

That’s why I make my own

 

[jtlctr]

You actually have the equipment to machine wheels? I’d love to see the process!

 

[TypeRbuilder]

No. I work with an OEM to make them

 

[TypeRbuilder]

You actually have the equipment to machine wheels? I’d love to see the process!

I do have a video somewhere though I'll have to post on the website.

 

[AspecR]

So the GO TO TDP racing wheel is the TDP6, which looks like the iconic TE37 for a reason! . And we were going to do another bronze version in 18" for the FL5, but....Considering going with something more SPOON looking?!

Stick a pin!

You've had a wheel company this whole time? why you aint plug it on the forum before?

 

[TypeRbuilder]

I don't want to get in trouble for "selling stuff" LOL. Just something I do for fun, but have sold quite a few sets with great luck on and off the track!

 

[TypeRbuilder]

I can get on board with this look

 

[TypeRbuilder]

So the new 5 spoke wheels, 18x10", will run right about 21.5lbs per!

 

[TypeRbuilder]

Ok...decision is made and 99% final! LOL

TDP5 wheels: 18x10", 53 offset - 13.5mm outward bump, but flush with the stock wheel on the inside!
285/35-18 Kenda Vezda UHP Max+ rubber!
Drop the car with J's or similar springs about an inch or less.

 

[TypeRbuilder]

Did the mock up today and I do need to tweak a few little things with the lettering but this is what the final will be close to looking like.

 

[scottjua]

Will those be decals or milled in? Will it fit OEM center caps by chance?

Sponsored