DIY Splash Guards

[JustJim]

I couldn't find quite what I wanted for splash guards, so I decided to make a set. The worst part was sorting out the fastener pattern, and coming up with a way to add one more fastener to to each piece to keep it from flopping around. I chose HDPE material from Menards which is the same stuff most cutting boards are made from with a 0.1" thick, 24"x36" sheet costing only $20. I'll likely make another set with tweaks to the general shape after I live with the first iteration for a few weeks.
Jim

Sponsored

 

[TiNuts]

Looks great! I’ve been considering the same thing, but I can’t find the plastic at my local Menards.

 

[HondaProGuy]

Just had my PPF guy add film to the rear after doing the whole front end in Xpel Ultimate.

 

[JustJim]

Nice, I like the cleaner look of PPF over mudflaps, but I have a short bit of gravel to cover to reach the pavement so I went with the flaps to eliminate any mud slinging.

 

[KhaoS2K]

Save yourself the hassle. For less than 120$, you get the toughest and better lasting material possible (polyurethane), no need to drill any hole, a tight mesh that actually filters out road debris and you can adjust the flaps to poke out more or less, however you prefer.

Version #3 is now out with updated features and hardware. No more 3M tape required. Website and install guide will be updated this weekend, since we just finished the project last Friday.

Honda Civic Type R / FL5 (2022-2024) / Rock Guards and Mesh combo

Check out our IG page for more pics
@fx3d.design

 

[araska]

Save yourself the hassle. For less than 120$, you get the toughest and better lasting material possible (polyurethane), no need to drill any hole, a tight mesh that actually filters out road debris and you can adjust the flaps to poke out more or less, however you prefer.

Version #3 is now out with updated features and hardware. No more 3M tape required. Website and install guide will be updated this weekend, since we just finished the project last Friday.

Honda Civic Type R / FL5 (2022-2024) / Rock Guards and Mesh combo

Check out our IG page for more pics
@fx3d.design

LOL I was going to recommend the fx3d ones I just ordered! Shill shill shill xD

Sponsored