JDM Honda Access Interior LED Door Lights and Center Console Lights installed.

[JDM_DOHC_SiR]

Spent the good part of the day installing the Honda Access LED light kit's on the doors and center console... turned out pretty nice Now on the other hand install was a Pain in the Ass!! the wiring and finding the correct wires to tap into.. and while I was in there ripping everything apart .. I went ahead and installed some ACUITY Shifter base bushings for good measure they firmed up the feel of the shifter when feels great!.. needless to say it's not the install to take on if you don't have patience
Anyways here are some pic's and if any of you try to install this in the future I'll be glad to answer any questions you might have

Sponsored

 

[POPNTEC]

Weirdest thing, if it was my Jeep I’d have no problems attempting this, but my Type R, never!

 

[Scottyy]

Saving this for whenever I decide to work on my Type R….

 

[Scottyy]

Spent the good part of the day installing the Honda Access LED light kit's on the doors and center console... turned out pretty nice Now on the other hand install was a Pain in the Ass!! the wiring and finding the correct wires to tap into.. and while I was in there ripping everything apart .. I went ahead and installed some ACUITY Shifter base bushings for good measure they firmed up the feel of the shifter when feels great!.. needless to say it's not the install to take on if you don't have patience
Anyways here are some pic's and if any of you try to install this in the future I'll be glad to answer any questions you might have

Would you ever do a tutorial?

 

[JDM_DOHC_SiR]

Would you ever do a tutorial?

Funny that you say that…. I’m trying to put together a very simple “basic” set of instructions with some tips of the issues I ran into….
Might add it to the top post in a week or so
It will be for the following.
Center console LED Kit
Door LED Kit
And Upgraded Footwell and Front Seat LED Kit ( which I have yet to post up )

 

[CyberCTR]

Funny that you say that…. I’m trying to put together a very simple “basic” set of instructions with some tips of the issues I ran into….
Might add it to the top post in a week or so
It will be for the following.
Center console LED Kit
Door LED Kit
And Upgraded Footwell and Front Seat LED Kit ( which I have yet to post up )

Where did you get that upgraded metal footpad?

 

[UFO CTR]

Funny that you say that…. I’m trying to put together a very simple “basic” set of instructions with some tips of the issues I ran into….
Might add it to the top post in a week or so
It will be for the following.
Center console LED Kit
Door LED Kit
And Upgraded Footwell and Front Seat LED Kit ( which I have yet to post up )

Right on for hooking it up
I did it for my FK8 and the hardest part is feeding the harness thru the door accordion ... that was painful I might do this again.

 

[JDM_DOHC_SiR]

Right on for hooking it up
I did it for my FK8 and the hardest part is feeding the harness thru the door accordion ... that was painful I might do this again.

Right on! you nailed it…the door plug was the biggest pain it was easier on the 10th gen for sure… as you can see in the pictures I removed everything I could minus the airbag to get access to the connector to make it as painless as possible… that connector is bitch to say the least.. it has 4 half assed retaining clips on the outside under the rubber boot and once those are released it’s pretty straight forward .. then you release the upper blue clip to unset the harness

 

[JDM_DOHC_SiR]

Where did you get that upgraded metal footpad?

?
Metal foot pad? Not sure which item you are talking about

 

[Scottyy]

Funny that you say that…. I’m trying to put together a very simple “basic” set of instructions with some tips of the issues I ran into….
Might add it to the top post in a week or so
It will be for the following.
Center console LED Kit
Door LED Kit
And Upgraded Footwell and Front Seat LED Kit ( which I have yet to post up )

Awesome! Looking forward to it. Keep it up!

 

[Scottyy]

Spent the good part of the day installing the Honda Access LED light kit's on the doors and center console... turned out pretty nice Now on the other hand install was a Pain in the Ass!! the wiring and finding the correct wires to tap into.. and while I was in there ripping everything apart .. I went ahead and installed some ACUITY Shifter base bushings for good measure they firmed up the feel of the shifter when feels great!.. needless to say it's not the install to take on if you don't have patience
Anyways here are some pic's and if any of you try to install this in the future I'll be glad to answer any questions you might have

Do you have the link to where you bought the kit?

 

[CyberCTR]

?
Metal foot pad? Not sure which item you are talking about

Yeah metal footpad

 

[JDM_DOHC_SiR]

Do you have the link to where you bought the kit?

Brother in law works for Honda Japan so he was able to get these for me.

 

[JDM_DOHC_SiR]

Here are the part numbers if you need them..

 

[mbaapk]

Spent the good part of the day installing the Honda Access LED light kit's on the doors and center console... turned out pretty nice Now on the other hand install was a Pain in the Ass!! the wiring and finding the correct wires to tap into.. and while I was in there ripping everything apart .. I went ahead and installed some ACUITY Shifter base bushings for good measure they firmed up the feel of the shifter when feels great!.. needless to say it's not the install to take on if you don't have patience
Anyways here are some pic's and if any of you try to install this in the future I'll be glad to answer any questions you might have

That looks so good! The sight of everything torn apart gives me White Castle like heartburn though. You think a dealer would install it?

Sponsored