Lug oem lug nut 19mm or 22mm

[Bobbyt]

Taking off my stock wheels for winter what mm wrench will i need

Sponsored

 

[MoodySara]

Stock nuts are 22mm on the FK8.
I recommend a nylon covered socket wrench to avoid scratching the wheels. There's not a lot of space in there.

 

[MooMoo]

OEM lugs nuts are 22mm

 

[Nothing]

Stock nuts are 22mm on the FK8.
I recommend a nylon covered socket wrench to avoid scratching the wheels. There's not a lot of space in there.

This, but because these wheels paint is insanely fragile. I covered my 22m in blue tape on the outside since I didn't want to get a set just to get one nylon covered socket. Works great, just take time and it won't scratch.

 

[MooMoo]

yeah you could just put electrical tape on the outside of the socket. Nylon covered sockets are inexpensive however they are not all made the same. I get Hazet sockets for all my wheels, they are not cheap but they are german quality that will last forever, always a perfect fit.

 

[AZCWTypeR]

Also CTR lug nut torque is higher than most Honda's at 95 ft-lb.

 

[Nothing]

I wonder if they fixed the manual yet in the newer years.

 

[MooMoo]

I wonder if they fixed the manual yet in the newer years.

I think they have for 2025

Sponsored