Need Help with Invidia Q300

[BC504]

I have a Q300 sitting in my garage waiting to be installed on Friday, I can follow up with pictures after complete. Just have to fight my tips a bit since the slip-ons are out of round on all 3

Classic Invidia packaging

I can tell you just from playing with the system after unboxing that there should be a lot of room to adjust the tips to your liking, the only one that is not adjustable in or out is the center since it also bolts to the muffler section for support as its carrying the valve and a resonator. The outer tips can be slid in or out as far as you want to create the look you're after. I plan to set mine dead even with each other and the diffuser.

Sponsored

 

[Rudy25FL5]

Well can’t wait to hear your feedback. I’m glad that there is some adjustability. Thanks again!

 

[Unity Performance]

For what I saw, the INVIDIA 400 is the one sold here. I also saw that one, but you put it on the search engine, and it doesn’t seem to pop up for FL5. For what I gather.

You're partially right. We convinced Invidia USA to start offering them here. Initially they only offered the R400, thinking that all Type R owners would want the louder exhaust.

https://unity-performance.com/search?q=invidia+fl5

 

[BC504]

Got the install knocked out and it was surprisingly easy to bend the piping with vise grips to get the tips on so no real issue there.

You can’t completely set all 3 tips flush with each other but you can get them very close. The center solidly mounts and the outer tips when flush with the center aren’t slipped far enough onto the piping for me to be comfortable with, but it still looks great IMO.

 

[Rudy25FL5]

That looks really good ! How do you like it so far and do you have any more pictures from the back? Thanks again

 

[Evox787]

Got the install knocked out and it was surprisingly easy to bend the piping with vise grips to get the tips on so no real issue there.

You can’t completely set all 3 tips flush with each other but you can get them very close. The center solidly mounts and the outer tips when flush with the center aren’t slipped far enough onto the piping for me to be comfortable with, but it still looks great IMO.

looks really good and not as far out! How loud it is? The outlets are the same size the 3 of them?

 

[BC504]

That looks really good ! How do you like it so far and do you have any more pictures from the back? Thanks again

Looks great from the rear. The adjustable rear hangers let me tuck it up pretty high which I prefer.

I had a remark dual tip stainless exhaust before so it’s the easiest way for me to compare it. Valve open it’s louder than the remark, valve closed it’s quieter with a hell of a lot less drone. I would call it oem+ with the valve closed and completely tolerable under load even for someone like me who gets headaches easily and often.

all 3 outlets are the same size as well.

 

[Rudy25FL5]

Thank you again and it looks awesome!

Sponsored