RedCarrot
Member
- First Name
- Ben
- Joined
- Aug 4, 2025
- Threads
- 3
- Messages
- 42
- Reaction score
- 39
- Location
- Tucson, AZ
- Vehicle(s)
- FL5 Type R, 718 Spyder RS
- Thread starter
- #1
Ever since I got a test drive in a Type R (albeit a brief and tame one) at a dealership, I was thoroughly impressed by it and had been in the hunt for one for over a year. Last week I finally landed a low milage, well sorted '24 with a healthy list of desirable mods in LA, Cali. In short, It is an incredibly engaging and exciting machine to drive - I haven't felt this much about any car that I have owned since my AP1 S2000 some 20 years ago. It is the type of cars that I want to take it out for a drive just to drive.
Below is the list of performance/suspension mods that came with the car:
-MST intake -27 Won Kuro turbo
-MST downpipe -WOT microtube intercooler
-CSF radiator
-Hondata Canflex
-Mishimoto coolant overflow
-Spoon progressive springs
-Wunderladen rear camber
-15mm front spacers and 20mm rear spacers
From the power standpoint, it was dyno'ed by previous owner at 355 whp and 327 wtq on e27, on a Mustang dyno. (I will use 91 only) I suspected it's on a conservative tune given the mods and the previous owner agreed as much. Despite the numbers I feel it is pulling really hard with very little turbo lag sub 2,500 rpm. It feels substantially quicker than my previous MK8 Golf R dyno'ed at ~365 whp and ~355 wtq (also on Mustang dyno). I am very satisfied with its acceleration but I also don't want to leave any low hanging fruits on the vine. Do you guys think there's more to be had via a more aggressive tune and/or additional easy/inexpensive mods (i.e. turbo inlet pipe etc.)? Pre owner mentioned it is currently at or near the ceiling without meaningful upgrades to HPFP and injectors.
From the suspension standpoint, I have just swapped in ITS ADS (possibly DSC in near future) and about to install Cobb RMM. In my previous cars I quite often added stiffer sway bar(s) and chassis stiffening braces (i.e. Cuzco center brace). Do you guys think they are worthwhile in the Type R? This car is mainly my errand runner (60%), canyon carver (35%) and an occasional track toy (5%). Brake pads, line and fluid will be upgraded soon; forged wheels when I free up enough space in my garage from selling previous car parts lol
Thank you in advance for your feedbacks
Below is the list of performance/suspension mods that came with the car:
-MST intake -27 Won Kuro turbo
-MST downpipe -WOT microtube intercooler
-CSF radiator
-Hondata Canflex
-Mishimoto coolant overflow
-Spoon progressive springs
-Wunderladen rear camber
-15mm front spacers and 20mm rear spacers
From the power standpoint, it was dyno'ed by previous owner at 355 whp and 327 wtq on e27, on a Mustang dyno. (I will use 91 only) I suspected it's on a conservative tune given the mods and the previous owner agreed as much. Despite the numbers I feel it is pulling really hard with very little turbo lag sub 2,500 rpm. It feels substantially quicker than my previous MK8 Golf R dyno'ed at ~365 whp and ~355 wtq (also on Mustang dyno). I am very satisfied with its acceleration but I also don't want to leave any low hanging fruits on the vine. Do you guys think there's more to be had via a more aggressive tune and/or additional easy/inexpensive mods (i.e. turbo inlet pipe etc.)? Pre owner mentioned it is currently at or near the ceiling without meaningful upgrades to HPFP and injectors.
From the suspension standpoint, I have just swapped in ITS ADS (possibly DSC in near future) and about to install Cobb RMM. In my previous cars I quite often added stiffer sway bar(s) and chassis stiffening braces (i.e. Cuzco center brace). Do you guys think they are worthwhile in the Type R? This car is mainly my errand runner (60%), canyon carver (35%) and an occasional track toy (5%). Brake pads, line and fluid will be upgraded soon; forged wheels when I free up enough space in my garage from selling previous car parts lol
Thank you in advance for your feedbacks
Sponsored
Last edited: