spiff72
Senior Member
- Joined
- Dec 6, 2017
- Threads
- 5
- Messages
- 94
- Reaction score
- 23
- Location
- West Michigan
- Vehicle(s)
- 2023 Type R
Heh - 4.5mm is what i needed to know. That's actually about 3/16"
Sponsored
fenix-silver
Senior Member
- Joined
- Nov 12, 2018
- Threads
- 21
- Messages
- 684
- Reaction score
- 58
- Location
- Central PA
- Vehicle(s)
- 2024 Type R; 2019 Si (sold)
I had a few plastic washers lying around that came with a picture hanging kit or something. Just had to drill out the hole a bit. Work great. I know Lowes carries a whole assortment of nylon washers as well which I used in the past to mount mud flaps on my WRX.
KhaoS2K
Member
Quick follow up since I've had a bunch of DMs and emails regarding the new version.
Here's how the V3 fronts guards will be looking like.
Still looking for a local guy willing to let me work on his car to modify the rear design and add a lower bracket that shall eliminate the need for the tape and additional screw.
This modification should offer the possibility for the older models to use that bracket as well.
Product is now back in stock on the website.
Thanks guys!
Here's how the V3 fronts guards will be looking like.
Still looking for a local guy willing to let me work on his car to modify the rear design and add a lower bracket that shall eliminate the need for the tape and additional screw.
This modification should offer the possibility for the older models to use that bracket as well.
Product is now back in stock on the website.
Thanks guys!
KhaoS2K
Member
Thank you for the order!Just ordered mine just now! Hoping they come soon as I’m scared to drive on these ugly roads without the proper protection!
Any idea how long it’ll take to get here to Los Angeles?
We have made a bunch of modifications and upgrades this week since I was able to get a hold of an FL5 to test fit everything.
I'll be working on the updated install guide during the weekend, but it may take a day or two more than usual to send the package out. You'll get the fully updated version #3 though, so it'll be worth the wait.
Usually takes about 5-10 days to arrive to Los Angeles.
I'll be posting the complete list of upgrades over here in a bit. We made sure that most upgrades will be fully compatible with the older versions. So the plan is to make a retrofit hardware kit available to anyone interested.
Stay tuned.
Was wondering if today is when the product will be shipped??
KhaoS2K
Member
Shoot me an email to (info "at" fx3ddesign.com) with your order number and I'll see where you currently sit in the pipeline.Was wondering if today is when the product will be shipped??
06S2k07Si
Senior Member
I think this is a great suggestion and should be considered. I just purchased a set myself today and am looking forward to seeing these in person. One of my concerns in that based on all of the pictures I've seen, I think they should come up higher in both the rear and the front.If I had to make a small suggestion, i'd want the flaps to go up and reach that third OEM screw in the bumper. That way, most of the painted surfaces will be protected.
Thanks, Brian
KhaoS2K
Member
***SOLD***
I have a set of the previous V2 design in stock. It will come with the updated V3 hardware, so the only difference will be the pattern of the vented area which is a bit more opened up.
Only available in black and only have one full set available. First come, first serve!
FX3D Design - FL5 Rock Guards (direct link)
I have a set of the previous V2 design in stock. It will come with the updated V3 hardware, so the only difference will be the pattern of the vented area which is a bit more opened up.
Only available in black and only have one full set available. First come, first serve!
FX3D Design - FL5 Rock Guards (direct link)
Last edited:
svvitch
Senior Member
Installed mine last week. Went well and held up for my weekend track event. So far so good kept the rubber off the side of the car
Sponsored
Similar threads
