Hondata FL5 FlashPro released

[Phenom3030]

I didn't think you could change the exhaust valve in flashpro...assuming you're referring to the valve in the muffler right?

Yes, the valve in the muffler. According to Jester04 you can.

Also please when updating the software take the flashpro with you so the firmware can be updated on that too. It needs to be unplugged from the car.

Also on the software now you can control the exhaust valve at will no need to remove the fuse anymore.

Sponsored

 

[02SilverSiHB]

Yes, the valve in the muffler. According to Jester04 you can.

Wow that is awesome, I didn't know that.

I guess since your tune is locked it prevents you from changing that. You should be able to ask your tuner to unlock that feature for you or at least change it for you and send an updated tune.

 

[Clark_Kent]

Wow that is awesome, I didn't know that.

I guess since your tune is locked it prevents you from changing that. You should be able to ask your tuner to unlock that feature for you or at least change it for you and send an updated tune.

For a fee

 

[B16B]

For a fee

Phearable lol

 

[Jester04]

For a fee

I charge no fee’s for silly stuff like that. Just tell me what you want and I make it happen. Same with the pops. Everybody has different tolerance for noise.

 

[Phenom3030]

I charge no fee’s for silly stuff like that. Just tell me what you want and I make it happen. Same with the pops. Everybody has different tolerance for noise.

Strongly considering you for a new tune after scouring the forums. I’ve only got a Spoon filter right now. But ordered a 27Won down pipe, PRL front pipe, and Hybrid Racing Formula exhaust recently during the Black Friday sales. My only concern is that it’s getting cold here in Colorado, so I’ll be limited on when I can do datalog runs. (I’ve only got summer tires)

 

[02SilverSiHB]

For a fee

Lol hope it's free. Mine changes stuff all the time... dumb

I charge no fee’s for silly stuff like that. Just tell me what you want and I make it happen. Same with the pops. Everybody has different tolerance for noise.

Yeah my tuner is the same way, he'll change simple stuff like that for me for free.

 

[22Si]

Strongly considering you for a new tune after scouring the forums. I’ve only got a Spoon filter right now. But ordered a 27Won down pipe, PRL front pipe, and Hybrid Racing Formula exhaust recently during the Black Friday sales. My only concern is that it’s getting cold here in Colorado, so I’ll be limited on when I can do datalog runs. (I’ve only got summer tires)

Go with my guy @Jester04 above

 

[limrr]

Question for those that had pops and bangs enabled on their tune through Hondata flashpro.

My FL5 was tuned with the hondata 91 basemap, with pops and bangs enabled only in +R Mode, for the last 12 months or so. I drive in individual mode, with the engine in the sport setting about 85% of the time, and then in the +R setting the remaining 15%.

During the last year, I've noticed that whenever the engine is set to +R, the RPM, for lack of better word, is jerky/jumpy. When I'm in first gear, letting go of the gas, the RPM is jumping before dropping, so it's making my car jerk. I do not experience this whatsoever in sport mode.

I remapped my car yesterday to the same tune, minus the pops and bangs, and went for a drive in +R mode and did not experience any jerkyness. I like having the pops and bangs on but it feels like the car isn't as smooth with it enabled.

I'm thinking if I should test pop and bangs enabled in sport mode and seeing if I'm getting similar feedback, but before that thought I'd ask if other drivers are experiencing something similar? My car is stock minus the PRL HVI and the tune.

 

[shadax]

When I'm in first gear, letting go of the gas, the RPM is jumping before dropping, so it's making my car jerk. I do not experience this whatsoever in sport mode.

Interesting. Could you make a video of the behavior?

When I let off throttle, say around 3500 RPM, I hear a couple pops as the RPMs drop . I've put about 5k miles on my car since I tuned it July last year. Same tune and mods for the most part, just the PRL intake.

I believe there's some base map supported settings about rev hang and adjusting tire spin on launch, did you change anything else that may have contributed to this?

 

[simpleisbest]

Has anyone set up launch control with Hondata in their FL5?
How did you set it up?

Going through the settings, it seems that to activate the launch control feature you need to also activate anti-lag? I want launch control, but not sure I really want the anti-lag on my stock motor and turbo.

Sponsored