Icehawk's "OEM+" speaker upgrade

[Icehawk]

A few people have made them, I think primarily to make screwing in the driver easier but you can get some more depth too. A member sent me one but I haven’t used it since my current setup works.

Honestly, the box is so small I doubt you would get much out of a deeper driver. Either use the cheap 1ohm driver with stock power or go custom.

Sponsored

 

[vonlaser]

I published a sub ring model you can print yourself or send me a few bucks and I can send you one. It's only 1/4" thick, can make it deeper, but icehawk knows what he's talking about, not much to be gained with a larger sub in the tiny box.

FL5 sub ring 3d print

 

[ProjectDD]

Found the connectors for the Bose tweeters for anyone who wants to plug directly into the factory wiring without hacking it all up. Link is from AliExpress

Also, the connector for the center speaker should be the same as the one for the subwoofer. Link from AliExpress.

It looks like these tweeter plugs aren't being shipped to the US anymore. Has anyone been able to find another source for them?

 

[Magneto198]

It looks like these tweeter plugs aren't being shipped to the US anymore. Has anyone been able to find another source for them?

Good ol tarrifs.

Sponsored