SCCA Autocross Stock Class

[SlowAP2]

Anyone fit the APEX ARC-8 +58 wheels. Curious on caliper clearance and if a small spacer would be needed

I usually run a 5mm spacer up front for the track width. Tried it Sunday without and was shocked how close to the caliper it is. actually have a pic handy of it LOL

 

[StevenMatchett]

Awesome, I like the look of these more than the ec7 and are a bit lighter

 

[SlowAP2]

Awesome, I like the look of these more than the ec7 and are a bit lighter

Just be mindful of thread engagement. I got some lugs that have a shank to go into the wheel holes for more turns. Didn't feel the stock stud length was enough with a 5mm spacer.

If you do extended studs becomes a non issue.

 

[StevenMatchett]

Just be mindful of thread engagement. I got some lugs that have a shank to go into the wheel holes for more turns. Didn't feel the stock stud length was enough with a 5mm spacer.

If you do extended studs becomes a non issue.

If I can run without spacers I'm okay with the little bit less rotating mass

Sponsored