*The FL5 Track Junkie Thread*

[BigBird]

This one works:
https://www.amazon.com/dp/B01MYXAXS5?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

I use it with this:
https://www.amazon.com/dp/B000TK9FE8?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

You'll need some fittings to adapt the line over (some you may have already):
https://www.amazon.com/dp/B085X68CMJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B07D9D2BS1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

https://www.amazon.com/dp/B0CTFLDZG3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

This cap I tried with their adapter, and it leaked when i got to about 15 psi maybe less.

Sponsored

 

[MooMoo]

where did they leak from?

also I forget but 15psi? I think I do like 10 or 12 but I forget

 

[BigBird]

where did they leak from?

also I forget but 15psi? I think I do like 10 or 12 but I forget

the fitting. My VW needed high PSI to work right with the ABS and never had an issue. Never though of using less than that...I like to see the needle hit the limiter

 

[Rexpelagi]

where did they leak from?

also I forget but 15psi? I think I do like 10 or 12 but I forget

Ya I usually stick with ~10-15psi - no specific number, but I just try to keep it in that range.

 

[svvitch]

I'm cheap I just use this check valve setup and pump the brakes:
Amazon.com: Allstar Performance ALL11017 Bleeder Bottle with Magnet and Check Valve , White : Automotive

 

[BigBird]

I'm cheap I just use this check valve setup and pump the brakes:
Amazon.com: Allstar Performance ALL11017 Bleeder Bottle with Magnet and Check Valve , White : Automotive

I have that as well. I do love me some tools. Those work excellent on motorcycles as well.

Last resort for me

 

[MooMoo]

haha I have that bottle too.

You could always get some of these

https://www.stahlbus-us.com/bleedin...ahlbus-bleeder-valve-m10x10x16mm-m-steel.html


I would 100% get these if I was bleeding my brakes more than once a year. The brembos are as soft as cheddar cheese and constantly opening and closing the bleeder will probably eventually start leaking.

 

[BigBird]

haha I have that bottle too.

You could always get some of these

https://www.stahlbus-us.com/bleedin...ahlbus-bleeder-valve-m10x10x16mm-m-steel.html


I would 100% get these if I was bleeding my brakes more than once a year. The brembos are as soft as cheddar cheese and constantly opening and closing the bleeder will probably eventually start leaking.

yeah these look like the ticket for sure. they costly, but they also wouldn't leak at the threads.

 

[svvitch]

haha I have that bottle too.

You could always get some of these

https://www.stahlbus-us.com/bleedin...ahlbus-bleeder-valve-m10x10x16mm-m-steel.html


I would 100% get these if I was bleeding my brakes more than once a year. The brembos are as soft as cheddar cheese and constantly opening and closing the bleeder will probably eventually start leaking.

AP Racing has a fix for me. I can tell my wife I just need to replace the calipers, and AP is cheaper than factory ?

 

[TW00Si]

Anyone have the part number for the front brake rotor? Just the replacement, not including the center piece.

 

[MooMoo]

Anyone have the part number for the front brake rotor? Just the replacement, not including the center piece.

I don't think honda sells just the disc, you need to buy the whole thing. Dumb I know.

But I think paragon sells just the disc that will work with the OEM hat

 

[TW00Si]

Fug. Then I think that’s my excuse to get the girodiscs. ?

 

[MooMoo]

yep...
and your bleeder will start leaking and you can get the AP calipers too

 

[TW00Si]

Nah…I will get the bleeders you guys linked.

 

[svvitch]

yep...
and your bleeder will start leaking and you can get the AP calipers too

2025 everything is looking up!

Sponsored