Remote reservoir locations FL5

[jah29]

I am installing mcs 3ways an my FL5. Does any one have pictures of where they mounted the front and rear remote reservoirs for any coilover brand? Or links to some photos. I wasn’t creative enough to get google to find any pictures for me

thanks

Sponsored

 

[Tougefl5]

Fk8 or fl5

 

[jah29]

Whoops, Fl5.

 

[BigBird]

Fantastic buy! Did you find some spots to mount them?

 

[simpleisbest]

For the fronts, I just used a couple of cheap aluminum L-brackets from Amazon and some hose clamps. Seems to be sturdy enough

 

[svvitch]

To have these problems ?. I think wot Jason has them mounted to the hood maybe? Not sure I saw that correctly.

 

[J1Avs]

Fk8 or fl5

This is a CivicXI forum...

 

[svvitch]

This is what I was thinking of

 

[Tougefl5]

This is a CivicXI forum...

In reference to the chassis not the fourm. I've been waiting for him to work the kinks out of the set up before I get mine. That's the development kit .

 

[simpleisbest]

For the rears, if your rear lines have dry-break connectors you can route them through the plugs in the spare tire wheel well.

I just used some p-clamps and magnetic bases to mount while still still being able to pick up the canisters to adjust. Seems to be holding up without any unwanted movement so far.

 

[beaterfl5]

For the fronts, I just used a couple of cheap aluminum L-brackets from Amazon and some hose clamps. Seems to be sturdy enough

Would you mind sharing some links? Trying to go this route also

 

[simpleisbest]

Would you mind sharing some links? Trying to go this route also

For the brackets I used https://a.co/d/0aTQ5yK4
You'll need to shave the edge of one of the corners to make it fit right to the contours. I just used a dremel. I'm sure there are better ways then using the cheap ass furniture brackets like I did

To mount the canisters, I just used hose clamps.

 

[jah29]

finally going to post how I mounted my remotes

front passenger:

 

[jah29]

front driver:

 

[jah29]

rear passenger: