Sponsored

Official Wheel Fitment Thread for 11th Gen FL5 Civic Type R

Robo7

Senior Member
Joined
Feb 13, 2024
Threads
11
Messages
252
Reaction score
327
Location
USA
Vehicle(s)
2024 Civic Type R
So after looking through 100 samples of different shades of white for powder coating, I think these 2 are the closest. Number one is called off-white-II and number two is called snow bunny. Company is prismatic powders.

I am planning on trying something on a set of wheels with off white II but likely not till March or April.

Also, three looked close but then I put it with the other two and it was much too light so I didn’t really think it would work.

IMG_4573.webp


IMG_4574.webp


IMG_4575.webp


IMG_4571.webp


IMG_4570.webp
Reviving this old post. I ordered some powder coat swatches as well. Indeed the closest are called "Snow Bunny" and "Off White II" from Prismatic Powders. "Snow Bunny" is a satin finish though so while out of direct sunlight it looks really close, in the sunlight the gloss of the car's paint becomes a different shade while "Snow Bunny" stays the same and it looks quite different. "Off White II" is a gloss finish, but it still isn't as glossy as the car. It's the color I would try if I had to go with one, but it's still going to look slightly off in certain lighting conditions. The only way to get a true color match is to go with paint or you could try adding some type of gloss finish over "Off White II" to get it closer to the gloss level of the car. Interestingly, some other colors their website says are a copy of Championship White are not even close. Anyway hope that helps someone.
 

scottjua

Senior Member
First Name
Scott
Joined
Jan 4, 2019
Threads
4
Messages
117
Reaction score
41
Location
Plano, TX
Vehicle(s)
2025 CW FL5 Type R, 2019 SGP FK8 Type R
Advan GT Beyond 19x9.5 +45
Falken Azenis RT660 275-30-19
Muteki Hub Centric Ring Set 72.6mm / 64.1mm
Lowered 1” front/back on Swift Springs

11 more photos…
IMG_6933.jpeg


Advan GT Beyond 19x9.5 +45
Falken Azenis RT660 275-30-19
Muteki Hub Centric Ring Set 72.6mm / 64.1mm
Lowered 1” front/back on Swift Springs

11 more photos…

For those of us without facebook… can you please post all the pics?
 

minimedic

Member
Joined
Feb 12, 2026
Threads
0
Messages
10
Reaction score
8
Location
USA
Vehicle(s)
2025 Honda Civic Type R - SGP
This is my 2025 Honda Civic Type R
Wheels & Tires:
Spoon Sports SW388 / 18" x 10" +40
Yokohama Advan 265/35/18

Suspension:
Spoon Sports Lowering Springs

How is fitment? any rubbing and how much poke. I thinking about running a 18x9.5 +35 which has a very similar wheel poke to your setup (1mm different).
 

00057

Senior Member
Joined
Nov 9, 2017
Threads
6
Messages
847
Reaction score
33
Location
SATX
Vehicle(s)
FL5 CTR
It is 100% perfect fitment.
Doesn't stick out at all and now that its totally settled in I love it
 


Rons_FL5

Senior Member
First Name
Ron
Joined
Mar 5, 2024
Threads
5
Messages
59
Reaction score
65
Location
Los Angeles
Vehicle(s)
2025 Civic Type R, 2022 Tesla Model Y, 2006 Evo 9
Hi all,

I am running TE37 SL 19x9.5 +36 on stock tires (265/30/19). Stock height. Doesn’t rub at all.
I’m thinking of running Eibach pro kit lowering springs. Has anyone run this set up lowered? If so, what is your experience (rubbing, camber needed, etc)?
11th Gen Honda Civic Official Wheel Fitment Thread for 11th Gen FL5 Civic Type R IMG_2828
 


OP
OP
System Motorsports

System Motorsports

Thomson
CivicX Basic Sponsor
First Name
Thomson
Joined
Jun 7, 2018
Threads
6
Messages
743
Reaction score
231
Location
Hayward
Vehicle(s)
Black (CBP) FK8 Civic Type R,

Allthingsfl5

Senior Member
Joined
Jan 7, 2025
Threads
3
Messages
64
Reaction score
87
Location
indiana
Vehicle(s)
2025 CW FL5
Anyone running CE28N+ 18x9.5 I found that the center cap size outer diameter is about 65mm and the inner diameter about 63mm to clip in. These fit perfect and I’m very happy with how they look. So much cleaner looking. Nothing worse than nice wheels with rusty brake rotors in the middle

4pcs Car Wheel Hubcaps Wheel... https://www.amazon.com/dp/B0F142D6WP?ref=ppx_pop_mob_ap_share

IMG_7030.jpeg
IMG_7014.jpeg
IMG_6999.jpeg
Anyone running CE28N+ 18x9.5 I found that the center cap size outer diameter is about 65mm and the inner diameter about 63mm to clip in. These fit perfect and I’m very happy with how they look. So much cleaner looking. Nothing worse than nice wheels with rusty brake rotors in the middle

4pcs Car Wheel Hubcaps Wheel... https://www.amazon.com/dp/B0F142D6WP?ref=ppx_pop_mob_ap_share

IMG_7030.jpeg
IMG_7014.jpeg
IMG_6999.jpeg
These still holding up? Just got these same wheels.
 

AspecR

Senior Member
First Name
Stefan
Joined
Aug 23, 2022
Threads
14
Messages
2,292
Reaction score
3,632
Location
Florida
Vehicle(s)
FL5 CTR
Just installed my Eibach Pro Kit springs. Came out nicer than I expected. No rubbing with this aggressive offset too! Love it!

wheels: TE37 SL Black Editions, 19x9.5 +36, stock tires.

IMG_3523.webp
IMG_3430.webp
That's cute and all but I think we're all here for the dog :love:. We've seen enough FL5s
 
 







Top